daily driver and build shouldn't not go together unless you either a:
a)put the motor together yourself, including research and labor
b)know EXACTLY how every component works in unity, but paid someone to build it.
Printable View
daily driver and build shouldn't not go together unless you either a:
a)put the motor together yourself, including research and labor
b)know EXACTLY how every component works in unity, but paid someone to build it.
Supercharging is alright for a DD in my opinion, people have had bad experiences, but i've had plenty of bad experiences with stock motors so thats not really saying alot.
The k24 cant be revved as high because of the stroke of the motor, even if you put the a2 head on it I wouldn't take it over 7000, maybe 7200 tops, that may be cautious or it may be reckless, I don't know, thats just what I would do.
K24 need mo gas.
Some people have gotten very very high gas mileage with built a2's
Blue print is a good company In my opinion.
I would take the k24 and put 11.5:1 compression pistons in it and maybe some head work, valves springs retainers, cause I think that would be fun as hell, having a high compression k24.
Theres too many options to list and now i feel drunk thinking about all these builds I wish i could do.
If you are in the market for k20a2 prices and boost etc etc.
You could just go ahead and buy a k24a2
You've got 3 lobe vtec, 2.4 liters, higher compression.
Personally if I could do it all over again. I would build exactly what my buddy crhatch02 and I are putting in his car. We are just waiting on the cams and block honing to put her in. K24a1 shortblock/tsx pistons/rods and a z3 pump/A2 head with valvetrain/brian crower stg2 cams/6spd tranny/streetlite flywheel/competition stg3 clutch/RBC intake manifold port matched to a bored throttle body/Injen CAI/hks high power/SSR RH/intake manifold gasket. Should make an easy and reliable 250whp or so.
out of curiousity. I am sure that setup will sound bad ass, any chance that the hks high power will be slightly restrictive? It just seems to me that with the RBC, port matching, bored TB, cams and then an SSR RH the piping will not be sufficient. But you are far more knowledgeable than myself so I could be way wrong.
whats the advantaje of the a2 head in the k24a1, if you cant rev it high?? i read that the a1 head flows as good as the a2 sint it??
a2 and z1 are the same. the difference is the cams. now they do have different trannies tho
So if you're going with aftermarket cams should you stick to a k24a1 over a k20a2/z3 head?