The cheapest swap is the K24a1. It has the same amount of horsepower but more torque, and you can run it with the stock ecu.
alright so i got my ep3 two weeks ago i love this car, it surpasses everyone else with looks and originality, i just want some more power. whats my best bet while stayin in reasonable price range (im expecting well over 1k) for a swap, i've heard negatives about putting heads on the a3 block. so whats my best bet or should i just go with forced induction. so... shoot!
The cheapest swap is the K24a1. It has the same amount of horsepower but more torque, and you can run it with the stock ecu.
^not quite. The k24a4 is the cheapest.
I wouldn't let price be your guide... do it the way you want it the first time, IMO. Many people keep upping the mods. If you like working on your car, and are willing to go through a few set-ups, then have fun. Otherwise, I suggest read everything in the engine/swaps sections and then decide what you really want.
you could put a k20a2 head on the A3 but you just wont gain much power from it plus for what you pay, its not worth it, tho it only costs 700-1000 its not worth for what the power you get. SURE you get that nice Vtec crossover but remember, you want power, then this is not for you. BEST bet, full k20a2 swap or a k20z1 swap. OR even better k24a2. Theres so many options, you could go for a K24a1 with a a2 head. ENDLESS possiblities. For 1000 its kinda hard to do anything. how bout Kpro? it'll start you somewhere, and you can work from there.
Personally I would go for a full swap just cus you can get the motor with the tranny and the k20a2 comes with a six speed....it all depends what your goals are. Just start off small and start gathering parts, like kpro, headers, exhaust. Then start saving up for the motor. If you have access to a dealer license then you could buy a wrecked rsx type S for CHEAP, cheaper then what you can get the motor for and you can use all the other stuff from the Rsx like lug swap, leather seats, motor swap THAT is if you have a dealer license
Sorry for such a long post just trying to show you your options. Also remember there is Boost, you could supercharge your car?
2jz is a great swap.
But really, I rock a k24a1.
everyone is gonna say k24 yada yada lol but i still love my k20a2....
2.0L all the way
k24 yada yada.
List your goals and we can help you more.
1. just doing a head swap is costly with very minimal gains, and you still need kpro to operate the engine.
2. K20A2 with 6spd and stock ECU
3. K24A2 with stock 5 speed and Kpro
4. K24A1/A4 w/ K20A2 head and Kpro
5.K20A3 w/JRsc
6. K20A3 w/turbo
7. Kpro is in my book, the first item to procure!
You can possiblly do this on a 2K shoestring budget, but anything on the K-series is not cheap, there is no longer "B"series cheapness! LOL
ALL advice issued with this "Disclaimer"
Tim "the Toolman" Taylor is my HERO ! ! !
"Labor Unions are Domestic Terrorist orgainizations"
^ Good list.
You might be able to make it close to 200 with a k24a1/a4 with I/RH/E and cams too.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks