JDM CTR gage cluster outside temp display

[moso]

d only eps that have the little guy are the ones with side airbags there is no jdm cluster with a little guy or all that non sence i have the ctr cluster with normal srs badging and i still have the temperature section

[DA9_GSR]

I'm bringing this back to life because I figued it out!
I have a 2003 Civic EP3. I installed an 02-03 CTR cluster. I noticed that there's an outside temp reading after "Trip B" in the cluster. So I did some digging and found that the 2003 Honda Accord EXL ambient temperature sensor has the same part number (80525-S30-941) as the CTR one. I also found a wiring diagram for the CTR cluster.

Here's what I did.

1. I removed the cluster.
2. Installed a pink / black 16 AWG wire into pin A10 of the blue connector. (see illustration)
3. Ran that pink / black 16 AWG wire to the sensor.
4. Installed a black 16 AWG ground wire from the sensor to the common ground behind the front bumper G201.

And Voila! It works. I also compared the readings to a brand new 2011 Honda and the outside temp readings were the same.

Here's a diagram of the blue Cluster Connector A



Here's the wiring diagram I followed