hey that ep looks familiar
nice write up nino
This fog light harness will make your fogs independent from the main head light switch. no more hi beams on, fogs off or fogs on, high beams off.
Supplies needed:
Relay
Relay Socket
Acura OEM fog light Switch PN: 08V31-S6M-01035
14ga. wire
Fuse Holder
Connectors
Black tape
Wire Cutter
Soldering iron
This is what you'll need to do to the Acura OEM Switch.
*courtesy of NTCustoms
hey that ep looks familiar
nice write up nino
welcome back.
thanks for the write up.
EPHATCH.COM 4 LYFE!! OFF THA CHAIN KREW #1
udontknowjack's mom was here....twice!
UPDATED SITE INFO!
Want to become a Site Sponsor? Click Here!
PM for HELP!!
The oem fog switch must have a seperate "on" signal from the dash/parking lights or a ground loop will be generated and the on and backlighting will both light up as soon as you enable the switch(parking or dash light source).
ALL advice issued with this "Disclaimer"
Tim "the Toolman" Taylor is my HERO ! ! !
"Labor Unions are Domestic Terrorist orgainizations"
i made made my own switch setup but with using a small toggle switch. i have the oem Honda switch but don't want to ruin it.
Supercharged K24 Frank powered
PM a Moderator for assistance anytime
thread is hella old haha... So just making sure, scrap all the wiring that comes with the kit and rewire everything according to the diagram?
do you have ebay fogs now?
Made with bits of real panther, so you know it's good.
...also on the rsx switch there are five cables and on the wiring diagram only has three wires going to the switch... how do i go from three to five... (i do want them to be independent from the headlights and stuff)
Hang tight.. I need to repost all this stuff.. I did not save it to repost and we had the last info dump.
I made a plug -N- Play harness with the RSX switch and ebay fog harness then posted a DIY, pretty much as I did it and it was fresh in my mind... it got lost.
I got all the pics and stuff... I just need to type it back up.
I was PMing a guy about doing it, maybe he saved a copy of at least the text, it was fairly comprehensive.
Made with bits of real panther, so you know it's good.
k that would be great just let me know where i would be able to find it... i just got them in the mail today and all the wiring that came with it seems like its plug and play, im hesitant to just go ahead and install them tonight but i [B]dont[B] want to burn any fuses or anything else. since i want my fogs to be separated from the controls of the headlights i though about doing it this way...
ANYONE Know where to find the replica Fogs that fit the JDM bumpers? I have the mugen 04-05 lip
i dont want to spend $480 for real ones
bump for chads info.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks