Getting some JDM bumpers, skirts, lips so Which parts will I need?

[MadLorEP3]

UPDATED 5/1/10

I have an 04 ep3 and I am getting the 04-05 JDM front bumper and lip, JDM sideskirts, JDM rear bumper and lip.

EDIT: JUST GOT MY SKIRTS ON THE CAR SO I KNOW EXACTLY WHAT PARTS ARE NEEDED FOR AN OEM INSTALL

For those of you that already have the items above can you please HELP ME OUT.
I need to know WHICH & HOW MUCH OF EACH brackets, clips, screws, nuts etc will I need for installation.
I no longer have any of my oem bumpers, skirts and liners as well thus I do not have any oem bolts, clip, brackets, washers etc.

So far I have already ordered the bumper clips from clubrsx but I still need alot more parts to make everything oem again.

04-05 JDM FRONT & REAR BUMPERS AND LIPS
I THINK THAT I NEED PARTS 35 (6), 27 (6), 29 (2), 25 (2), 34 (6), 28 (6), 33 (4) 15 (2) 37 (6),
26 (2) Total=$130.54 + shipping





04-05 USDM FRONT & REAR BUMPERS AND LIPS
I ALAREADY KNOW WHICH PARTS I NEED FROM HERE, ALOT but thats just me



02-03 JDM BUMPERS & LIP
[/COLOR][/SIZE][/B]



02-05 JDM SIDESKIRTS
I NOW KNOW THAT I NEED parts 2 (4), 15 (8), 19 (4), 17 (8) or another option would be to install an additional part number 2 on each side thus the new total parts needed would be 2 (6), 15 (12), 17 (12) 19 (6).

For the follwing parts 20 (2) & 22 (2), you DON'T need them because there are no holes corresponding to their location on the usdm ep3.INSTEAD YOU NEED part number 32 (6)



04-05 USDM SKIRTS

I would need PARTS 31 (18) and 32 (6) for the JDM skirts.



I already know that I need a JDM front rebar
I know that there has to be some type of modification of the rear oem rebar and the rear jdm rebar but if someone can elaborate on how to mod this then that would be great.

I also already know that I need an 04-05 JDM grill, along with the 04-05 JDM top trim piece

My main question now is whether the locations of the 9 holes on the side of the ep will match up with the locations of the 9 clips on the jdm sideskirts.
EDIT: YES, THE HOLES LINES ON THE USDM 04 EP LINE UP PERFECTLY WITH THE HOLES ON THE JDM SKIRTS.

EDIT: YOU NEED usdm parts 31 (18) and 32 (6) for the JDM skirts!!! Part 32 will be used on the fins, they have a sticky backing on them. Part 32 fits 2 of the holes on the fins but you have to make the third pair of part 32 a bit thinner so it would fit the hole on the JDM fin

PLEASE HELP A BROTHA OUT...ESPECIALLY THOSE BELONGING TO THE FACELIFT CREW
WHERE YOU GUYS AT.....


EDIT: SEEMS LIKE ALOT OF THIS STUFF HAS BEEN COVERED B4
THERES INFO ALL OVER THE PLACE ON THE HATCH
IT WOULD BE NICE TO HAVE IT ALL IN ONE PLACE
http://www.ephatch.com/forum/showthread.php?t=44454
http://www.ephatch.com/forum/showthr...ght=sideskirts


edit: ITS GOING TO COST ME ABOUT $300 TO GET ALL THESE PARTS WTF

[RedSiBaron]

PM me to remind me, i will tell you absolutely everything you need if you would like to do an OEM install...i say this because i have been drinking and cannot do this right now but a PM will remind me and i am more than glad to help you out...i've done an absolutely 100% oem install on my 02-03 type r exterior and can point you in the right direction

[MadLorEP3]

PM me to remind me, i will tell you absolutely everything you need if you would like to do an OEM install...i say this because i have been drinking and cannot do this right now but a PM will remind me and i am more than glad to help you out...i've done an absolutely 100% oem install on my 02-03 type r exterior and can point you in the right direction

Thank you kind sir
I will definitely send you a pm tomorrow when you are sober
Have fun in your drunkeness, its been awhile since for me....

[username011]

I went to my Honda dealer today and they said with the skirts you'll need 44 clips..22 on each side and they run $6 something from the dealer..

[MadLorEP3]

Are we talking about using the same clips for the 04 usdm sideskirts as the ctr sideskirts

[RedSiBaron]

first question, are you getting your side skirts BNIB? if you are they will have pop in clips on them...

your best bet for ordering the pop in clips is from www.hondaautomotiveparts.com or japanparts.com (if you are doing an OEM install you will need to be ordering from japanparts.com anyway)

for the sideskirts you will need to order from japanparts.com 2-3 underbody clips per side, each has a pop in fastener and 2 screw in fasteners that attach it to the sideskirt...the sideskirt will have 2 pre drilled locations each for the underbody clips, but there is a place on the skirt you can drill two additional holes and add a 3rd underbody clip per side

for the rear bumper there will be pop in clips that attach the lip to the bumper...the front lip will not have any clips instead it will use the oem screws and bolts that hold the fender liner and underbody covers to the stock bumpers currently

[mr-alternative]

I have an 04 ep3 and I am getting the 04-05 JDM front bumper and lip, JDM sideskirts, JDM rear bumper and lip.

For those of you that already have the items above can you please HELP ME OUT.
I need to know WHICH & HOW MUCH OF EACH brackets, clips, screws, nuts etc will I need for installation.
I no longer have any of my oem bumpers, skirts and liners as well thus I do not have any oem bolts, clip, brackets, washers etc.

So far I have already ordered the bumper clips from clubrsx but I still need alot more parts to make everything oem again.

04-05 JDM FRONT & REAR BUMPERS AND LIPS
I THINK THAT I NEED PARTS 35 (8), 27 (8), 29 (2), 25 (2), 34 (6), 28 (4), 33 (2) 15 (2) 37 (?), 26 (?)
CAN ANYONE CONFIRM THIS?




04-05 USDM FRONT & REAR BUMPERS AND LIPS
I ALAREADY KNOW WHICH PARTS I NEED FROM HERE, ALOT


02-03 JDM BUMPERS & LIP.
IS THERE A DIFFERENCE BTW 02-03 N 04-05 REAR BUMPER N LIPS?
I DONT THINK SO BUT I ASK BECAUSE THERE ARE 2 EXTRA PARTS 31 & 38 THAT ARE LISTED IN THE BELOW THAT ARE NOT
LISTED IN THE 04-05 JDM BUMPERS & LIPS DIAGRAM



[COLOR="red"]02-05 JDM SIDESKIRTS
I NOW KNOW THAT I NEED parts 2 (4), 15 (8), 19 (4), 17 (8) or another option would be to install an additional part number 2 on each side thus the new total parts needed would be 2 (6), 15 (12), 17 (12) 19 (6).

CAN ANYONE CONFIRM IF I WOULD NEED PARTS 20, 21, 22? I DONT THINK I NEED THEM BECAUSE THERE ARE NO HOLES IN THE BODY HIGH ENOUGH FOR THESE TO GO INTO BUT JUST WANNA CLARIFY.



04-05 USDM SKIRTS
WILL PARTS 31 & 32 ALSO WORK FOR JDM SKIRTS?
I would need PARTS 31 (18) and 32 (4) for the usdm skirts, SO WILL I NEED THE SAME QUANTITY FOR MY JDM SKRTS
IT TURNS OUT THAT part 32 is what people are calling sticky clips and they use this to install usdm skirts onto 02-03 ep3's



PLEASE HELP A BROTHA OUT...ESPECIALLY THOSE BELONGING TO THE FACELIFT CREW
WHERE YOU GUYS AT.....


EDIT: SEEMS LIKE ALOT OF THIS STUFF HAS BEEN COVERED B4
THERES INFO ALL OVER THE PLACE ON THE HATCH
IT WOULD BE NICE TO HAVE IT ALL IN ONE PLACE
http://www.ephatch.com/forum/showthread.php?t=44454
http://www.ephatch.com/forum/showthr...ght=sideskirts

to 04-05 jdm bumpers:

4pcs of #33

if its the screw and clip which i thin you need 4 pcs. of 26 and 37

[MadLorEP3]

to 04-05 jdm bumpers:

4pcs of #33

if its the screw and clip which i thin you need 4 pcs. of 26 and 37

thanks Andre
I updated the first post
so if I need 4 pieces of 33 then will I need 6 pieces of 28?

[MadLorEP3]

ok so i pretty much know which parts I need to get for the jdm front and rear bumpers and lip to be installed correctly

But I am still unsure about the parts I would need for the skirts. Especially need to know if the holes on the 04 ep3 match up with the holes for the jdm ctr skirts.

bump for some answers

[MadLorEP3]

Damn its gonna cost about $400 to get all these brackets and screws and clips
what the fuck

[ttttrigg3r]

lol. screw jdm. USDM! I really want to see pics when you get all this finished. Good luck

[Distance]

Damn its gonna cost about $400 to get all these brackets and screws and clips
what the fuck

gotta pay to play man. especially if you don't wanna do a half ass install.

[MadLorEP3]

Bump for an answer
First Post updated

1. Does anyone out there know if the 10 holes on each side of a jdm skirt match up to the 9 holes on the lower side of the 04-05 ep3?
2. Should I get the clip for the usdm sideskirts which is part 31 (18) or the clip for the jdm sideskirts part 21 (20)

04-05 USDM SKIRTS


02-05 JDM SIDESKIRTS

[MadLorEP3]

UPDATED FIRST PAGE
which tells you all the parts you need to install jdm sideskirts onto an 04 ep

[Kerby]

to the guys who's car came with the HFP side skirts and switched to JDM...

1.) Are there holes on the side of the car for pins where the end wings are?
2.) If there are, do they line up with the JDM pins?

thanks,