6 speed swap?

[pino1]

For the ep 6 speed swap, i've read that a buddy club short shifter doesnt need to be shaved or modified in order to get to 6th and reverse gear?
Is this right?

[Hondatuner87]

Yes, you are correct. There is no need to modify the shifter assembly if you buy the buddyclub spec short shifter.

[talonXracer]

Some stock shifters also do not require any modification.

[pino1]

Some stock shifters also do not require any modification.

stock shifter would also work? i've read that some people shaved like a piece of there shifter assembly in order to get to 6th and reverse tho..

[Draw7Seven]

stock shifter would also work? i've read that some people shaved like a piece of there shifter assembly in order to get to 6th and reverse tho..

Key word. Each of you said some. Some do, some don't. I have a short shifter. I like it. Kbai.

[civicSIracer]

i had to trim my stock shifter

[dannysi]

I had to shave my Buddy Club short shifter.
I have the US spec BC Short Shifter. You will have to shave that one in order to get into reverse.

[JetsPandaEP3]

ive got a BC short shifter in mine, it works fine. didn't have to do any modifications. just plug an play. i also HAD a six speed tranny as well and it worked great with it...

[AKEP]

omg what do you trim? i've been looking on every forum and noone shows where to trim?

edit: nvm i finally found the 3rd itteration of this exact thread with actual pics:
http://www.k-series.com/content.php?...3-Civic-Si-SiR

[Draw7Seven]

omg what do you trim? i've been looking on every forum and noone shows where to trim?

edit: nvm i finally found the 3rd itteration of this exact thread with actual pics:
http://www.k-series.com/content.php?...3-Civic-Si-SiR

Good link, host the pics here too imo.