DIY: Depo Headlight Projectors 04-05. 56K dont approach!

[StimulisRK]

agreed. extra rtv sealant around the edge/perimeter can't hurt. as mentioned, i recommended adding silica packets. they actually help remove condensation

Where exactly do I put the packet?

[Draw7Seven]

Where exactly do I put the packet?

Anywhere in the headlight housing that's not viewable to the outside public. All it's doing is soaking up moisture in the headlight housing.

[usedep3]

Oh... so thats what those packets were for. You know I've always wondered what those "DO NOT EAT" packets were. Haha! I'm in Arlington, next to the Cowboys Stadium.

if you can meet me off of N Cooper St and I-30, the packets are yours.

Where exactly do I put the packet?

Anywhere in the headlight housing that's not viewable to the outside public. All it's doing is soaking up moisture in the headlight housing.

^this.

the headlight is made of 3 layers. (1) the clear cover, (2) the middle layer that the blubs/projectors attach to, and (3) the back cover w/ gaskets. you can slip the packets into the headlight between the #2 & #3 layer. hope that makes sense

[StimulisRK]

Ok, I see what you guys are saying. I wasn't thinking of those gaskets back there. Thanks!

[Danielsle]

if you can meet me off of N Cooper St and I-30, the packets are yours.

PMed.

[andyman97]

I love the 56k references people put in their thread titles. Is there even 56k anymore?

[Danielsle]

I love the 56k references people put in their thread titles. Is there even 56k anymore?

Yes. Or just slow with internet. Sometimes my laptop doesnt get good internet connections and crashes when i try and get on some of these threads. I could simply resize my images, but it gets time consuming and im lazy

[hyu]

I love the 56k references people put in their thread titles. Is there even 56k anymore?

There's about 7million people still on dialup/dsl...

Sent from my autocorrect butchering device

[eternal780]

awesome

[Silvercard]

Let me know when the clear ones are obtained

[McTaggart34]

http://www.youtube.com/watch?v=wbDeK...&feature=feedu

[StimulisRK]

does anyone know if theres anything different in the 02-03 bumpers? I removed all the same clips and screws but its still not coming off. It seems to be pretty tight where you remove that screw from the wheel well.

Any ideas?

[cvicep3]

does anyone know if theres anything different in the 02-03 bumpers? I removed all the same clips and screws but its still not coming off. It seems to be pretty tight where you remove that screw from the wheel well.

Any ideas?

Pretty much the same. You can turn the wheel to left or right for more room.

[StimulisRK]

thats what I thought. Everything was the same, I even checked the service manual, I have everything out - i'm pulling on the bumper with my legs pushing on the tire and it wont come off; right at that circular part by the headlight, there is something keeping the bumper on. Everything else is loose and is ready to come off, just that little area on each side, feels like its bolted on tight. And yes, I took the screws out up top there.

This is driving me nuts.

[cvicep3]

There's only one screw holding that area which is in between the wheel and fender. Just pull it out and then toward to the front.