My Quest for 300HP N/A

[fEPst3r]

UPDATED 2/25 (Went to the track)

http://www.youtube.com/watch?v=8Z6-AwHCIrA

---------------------------------------------------------------------------------------------------------------------------------

UPDATED 2/28


No up close and personal shots of my car yet but i got some track shots, none the less pictures as requested.

Streets of Willow Event (k20a2 setup with bout 250whp)

All Day Every Day



Chasing an R35. Ended up getting a faster lap time than him by a few hundrends of a second



Far away shot











And some Booty



and me



Fastest Lap of the Day

http://www.youtube.com/watch?v=se9KKg-XP2Y


-------------------------------------------------------------------------------------------------------
THE BEGINNING

Project took about 6 months to complete. Countless hours of research, saving up, and waiting for parts. With the guidance of my boss, i was able to build it from bottom to top by myself.

dont mind the mopar box


plaster gauging to check clearances and figuring out what bearings to use




Checking Clearance


Filing down the Rings


Gapping Rings


Ready to be pushed down


JE 13.3s


Claying the motor to check piston to valve clearance


K20a2 Oil pump and baffled installed (k24a1 no modifying needed)


Karcepts PS and AC Delete


Js Racing Pan


Heres the K20a2 Head i ported myself




Motor together and ready to go


Heres what a day at the shop looked like


Motor is in


BCRH w/ Invidia Q300 Catback


Tuned by Todd @Churchs


Dyno Results (Not shown but 322 hp and 241 torque was the highest it made)




-----------------------------------------------------------------------------------------------------------------

Dyno Vids

http://youtu.be/DxHovLztP5k

http://www.youtube.com/watch?v=bP9GFKo5zq0

------------------------------------------------------------------------------------------------------------------


6 Months well worth it. The motor runs perfect, still in the process of breaking in the clutch. I will have some in car footage soon.


First Carwash in 6 months


Heres my mod list
Engine
K24a1 Block 88MM
JE 13.3:1 Pistons
Blue Print Pro I-Beam Rods
OEM Rod and Main Bearings
k20a2 Oil Pump
J's Racing Baffled Oil Pan
Circuit Racing Timing Chain Guide
Hybrid Racing Timing Chain Tensioner
k20z1 Timing Chain Cover
K20z1 Crank Pulley
Karcepts a/c and p/s Delete

k20a2 Port and Polished Head
Kelford stage 2.2 Cams
Blue Print VTC 40* Limiter
Supertech Dual Vavle Spring
Supertech Valves .5MM Oversized
Supertech Titanium Retainers
Port Matched RBC Intake Manifold
RC 750CC Injectors
Walbro 255 lph Fuel Pump
Skunk2 70MM Throttle Body
Custom Short Ram Intake with Apex'i Filter
Buddy Club Race Header

K20a2 6 Speed Transmission
Wavetrac Limited Slip Differiental
Synchrotech Carbon Synchros
5.07 Final Drive
Tsx 6th Gear
Clutch Masters Stage 4 6 Puck Cluch
Competition 11lb Flywheel