my old k20a3 with race header and 2.25" exhaust and skunk2 stage 3 cams made 196hp and 141tq, not that bad out of the little a3
Just have to bump this for a pioneer of Ephatch's community today and to show all the newer members what can be done with a set of K20a3 cams. Albeit these are custom, their specs are in between the Skunk2 Stage I and Skunk2's K20a3 Stage II cams from what I have gathered (although I could be wrong).
What reminded me was I am going to help a local install some Skunk2 Stage I cams and he asked me if it was worth it. I explained to him about chunky's Raz cams and what was done with them. Afterwards I realized that the threads had all be lost to history and the "Great Hatch Crash" of 2008.
So I thought I'd rebuild the thread to show members on here that K20a3 cams produce a good amount of power and can make your car quicker than you imagine with just simple cams & tuning.
*Just remember all this was done with a shorty header, imagine what I race header can do for you.
Become a Sponsored Member. Only $20 for an entire year!!
Need a service manual for your K-series?
Ep3 Service Manual DC5 Service Manual CL7 Service Manual
my old k20a3 with race header and 2.25" exhaust and skunk2 stage 3 cams made 196hp and 141tq, not that bad out of the little a3
Become a Sponsored Member. Only $20 for an entire year!!
Need a service manual for your K-series?
Ep3 Service Manual DC5 Service Manual CL7 Service Manual
tuner told me not to change the tensioner because he modifies it himself
i was all ready to buy the hybrid racing or skunk2 tensioner but he insisted on not getting it
1000 miles later or so his "modified" one failed while leaving a stop sign in second gear and driving like a grandma
this happened
its not the first time i have heard bad things from this guy but sadly i heard all the bad things AFTER i got it tuned
Ouch.....sorry to hear that....I have a spare K20a3 and spare K20a2 sitting in my house because of such "tuner" issues. I bought Chunky's modified tensioner with a brand new timing chain about 20k ago and have yet to have any issues with my 141k miles 9psi JRSC K20z1/K20a3 hybrid. Do you still have your dyno?
Become a Sponsored Member. Only $20 for an entire year!!
Need a service manual for your K-series?
Ep3 Service Manual DC5 Service Manual CL7 Service Manual
still riding on the only Raz's F/I A3 Cams...
unfortunately, i think Raz gave up on me...
lol
EPHATCH.COM 4 LYFE!! OFF THA CHAIN KREW #1
udontknowjack's mom was here....twice!
UPDATED SITE INFO!
Want to become a Site Sponsor? Click Here!
PM for HELP!!
yea right here, a picture of the screen lol
and a link to the thread i made
http://www.ephatch.com/forum/showthr...age-3-cams-etc....
WoW! Thats why i no longer use aftermarket cams! The few extra hp just aint worth the risk to me... OEM all the way!
Impressive numbers for such 'low' compression though...
Little bump for all those guys still stuck with the K20a3....
Go buy some K20a3/K24a4/K24a1 Skunk2 or Brian Crower cams, or do a nice VTEC killer setup using Z1/a2/a cams and enjoy!
Become a Sponsored Member. Only $20 for an entire year!!
Need a service manual for your K-series?
Ep3 Service Manual DC5 Service Manual CL7 Service Manual
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks