I think a pic of what the problem is would be in order.... You shouldn't be all the way to the bump stops (even though you shoulda cut them in half, at least).
Maybe it's just not settling right... Is the spring hung up on something?
Everything went great. Here is the problem I had---
I just got done installing my nuespeed race springs and the back for some reason didn't drop all the way. I put everything back the way it was. Was I suspose to take the bump stops off of the back?!?! I need help quick!! Thanks.
But everything is fine now:D
Last edited by Jodster; 07-22-2003 at 06:50 PM.
I think a pic of what the problem is would be in order.... You shouldn't be all the way to the bump stops (even though you shoulda cut them in half, at least).
Maybe it's just not settling right... Is the spring hung up on something?
maybe you forgot to install the new spring on one of them. look at your pile of stock springs, the red one isn't stock.:D
yeah ok that was dumb...
Well I fixed it. It just wasn't seeded right I guess cause after I took the car for a ride the back lowered on its own.
Anyways, it was a great install. No problems at all. Took 3 1/2 hours to do it all. I greased the crap out of everything so I have no noise at all!! And it handles great!! Thanks for the help guys. And thanks to Mike(cleanblacksi02) for the springs!!
Oh and I didn't have to remove or cut the factory bump stops.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks