Rim painting?

[whiteSIR]

I have a white 03 SIR and i just wanted to paint my stalk honda rims black... do u think i can pull it off with some good spray paints? or do u think it will not stick to the rims? i am broke lol!

[Ep3 No.2]

do a search buddy.

heres a quick answer for u
http://www.ephatch.com/forum/showthr...threadid=36549

[TrippZ]

hey dude, i painted my rims. tjhey'll work but you gotta take your time.

1) clean rims and degrease
2) using high grit sand paper (i used 1,000) sand areas that you want to paint
3) clean using water and alcohol
4) mask off tires and areas you odnt want painted
5) start spraying. do light coats. I used a primer for the first few coats. you don't have to i don't thikn
6) let them dry, use a heat gun too, I didnt, and my rims are starting to feel some sideeffects from it. i think i used a weak paint.

its not that hard but youll be very nervous doing them. these are after all pretty expensive pieces of metal!

[SiD 03]

I painted my rims too. It really easy to do if you take the proper prep time. For me I used Dupli-color Wheel paint (about $4 a can).
I took about a week of sanding and preping the wheels. You only need to use 320 grit paper but you can use higher. Then it took about an hour to paint. It only takes 3 hours before you can handle them. I used a can and a half of paint and half a can of clear coat.

[K2OH2SLOW]

yeah, i plan on repaintin my motegi's on tuesday... we shall see how good this turns out

[TTownEP]

I'm planning on bead-blasting mine (because I have access to a booth) and painting it with automotive paint and clearcoat. Anyone know of a reason why I shouldn't bead blast?

[sub_01]

Sand them down and than prime and then use high temp paint.

[SSM]

do it, then show us...

and we'll tell u if u made a mistake or not..

[TTownEP]

I'm sure it will be fine, I just wondered if anyone had encountered any problems. I'll be using a glass media. I've spent many an hour in front of that blaster, and the only thing the glass media has messed up is plastic stuff, and even then only if the pressure is turned up too high. Maybe when Uncle Sam gets my money back to me, I can do it...

[cody_sir]

i also used duplicolor on my rims and i could not be happier

[insomniaEP]

duplicolor ftw