Pluging up the oil pan

[clutch797]

Ok so I had to take off my turbo kit since my turbo is toast and now i faced with the problem of caping off my oil return line. I welded a -10an bung into the oil pan and i was wondering if there was a cap that i can buy to screw onto the bung instead of having to stick a bolt into the return line and clamping it. How have others pluged up theirs?

[weltall]

your local parker store should have the fitting you will need to cap it off

[talonXracer]

This is the fitting you require.

http://store.summitracing.com/partde...5&autoview=sku

[clutch797]

cool thanks.

[nightbear]

yea you can buy a little cap thingy, that screws onto it

[clutch797]

bought one today and pluged it up.

[davisj3537]

BTW I noticed the an fittings are just a normal "flared" fitting you can get at a home depot or lowe's in the plumbing department.

[tallblondkid]

i got one when i org welded my pan... got it at home depot