There isnt much info out for this swap since its not a popular choice to swap. i recently put this motor in my car and am VERY happy with the results. not only did i choose this motor for its fuel economy, i also chose it for the price - you can pick one up usually for under 800 bucks!

K24a4 Specs:

- 2,354 cc 2.4 liters in-line 4 front engine
- 87 mm bore, 99 mm stroke
- 9.7 compression ratio, double overhead cam, variable valve timing
- Unleaded fuel 87
- Fuel economy: EPA highway - 34mpg -- EPA city - 24mpg
- Multi-point injection fuel system
- Power: 119 kW , 160 HP SAE @ 5,500 rpm; 161 ft lb, 218 Nm @ 4,500 rpm


here is some info that will help others that want to do this swap, but had a hard time finding the info as i did.

Parts To Order:

CR-V Side Motor Mount - 11910-PPA-000 (Part #1)

EGR Port Plate - 18711-PM1-J00

EGR Gasket - 18715-PB2-000

EGR bolts (2) - 95701-08025-08

Thermostat Coolant Line O-Ring - 91315-PNA-003


Parts Needed from your A3:

Coolant Housing
Thermostat
Water Pump
Coolant Lines
Serpintine Belt
Altenator
Mounts (all except what the CRV replaces)
Wire Harness
2002 ep3 oem front sway (03-05 wont fit) OR 02-04 civic ex front sway (both fit)


Additional Parts:

DC5 (type s) header (ep3 rh wont fit for some reason)
Type S midpipe (unless you have your ep3 one cut to fit)
Kpro


i will update this thread with more info if i get it, since the old thread was typed right after the swap, i might have forgotten a few things in this one. hope this helps out!