hfp what are you talking about??? if you mean in the same diagram thats the rubber valence that goes under the bumper, its the stock piece on our bumperOriginally Posted by 72chevel
hfp what are you talking about??? if you mean in the same diagram thats the rubber valence that goes under the bumper, its the stock piece on our bumper
my ep is white...
- We can talk numbers all you want, but the bullshit stops when the flag drops...
yea it is that #3 that I wasn't sure about but valence would make sense.
So does anyone have the part numbers for the front lip. 5,6,11 and 12 and screw #48
Here is the partnumbers for the side skirt installation
letter B screw,2 you reuse those from the wheel well
letter D is 91503-SZ3-003 can be bought from the states and are also used on the top and bottom of the front bumper and the bottom of the rear bumper.
Letter E is the Japan version for the 02 si you need the sticky tape version so you don't have to drill holes you just clip it in and it sticks to car they work real well Most people skip everyother cause they are are a little spendy for 20 plus of these! I think these can still be bought in the states last I heard they were back ordered.
is called clip,side sill GA
91513-S5S-E01
Letter F is japan version for the 02 si you just use double sticky tape clean the area real good and use a good 3m tape.
Letter G is the screw that holds the bracket H on the skirt you need 4 per side so 8 per car I think these need to be ordered from uk or japan.
90104-SR2-003
Letter H is the underbracket 2 per side 4 per car clip D goes though the hole at the top into the car body underneath. I think these need to be ordered from uk or japan.
71804-S5A-R00
Last edited by 72chevel; 05-12-2008 at 05:11 PM.
i should mention that you can get all the underbody clips and such from japanparts.com i had them add them to the list of parts on their ep3 page...
my ep is white...
- We can talk numbers all you want, but the bullshit stops when the flag drops...
You got any partnumbers on the front spoiler bolts and spacers?
if you are talking about the bolts that hold the front lip onto the front bumper, i do not have those, i didnt run them, i just screwed the ends of the lip on, the damn thing stays on by itself pretty much...if you want to order them, email japanparts.com and they will give you a diagram and ask which numbers it is, you can tell them which it is, and then they will add them to the list of parts on the site and you can order them...i highly suggest that...then you can just direct people there to buy them
my ep is white...
- We can talk numbers all you want, but the bullshit stops when the flag drops...
email sent will see what comes back! thanks
Can source these from Acura US.
Ok thanks I edited it letter H "Underbracket" needs to be bought in Japan or UK right?
check the partnumbers against this I just added the partnumbers today.
Here is the partnumbers for the side skirt installation
letter B screw,2 you reuse those from the wheel well
letter D is 91503-SZ3-003 can be bought from the states and are also used on the top and bottom of the front bumper and the bottom of the rear bumper.
Letter E is the Japan version for the 02 si you need the sticky tape version so you don't have to drill holes you just clip it in and it sticks to car they work real well Most people skip everyother cause they are are a little spendy for 20 plus of these! I think these can still be bought in the states last I heard they were back ordered.
is called clip,side sill GA
91513-S5S-E01
Letter F is japan version for the 02 si you just use double sticky tape clean the area real good and use a good 3m tape.
Letter G is the screw that holds the bracket H on the skirt you need 4 per side so 8 per car I think these need to be ordered from uk or japan.
90104-SR2-003
Letter H is the underbracket 2 per side 4 per car clip D goes though the hole at the top into the car body underneath. I think these need to be ordered from uk or japan.
71804-S5A-R00
yeah the only thing is that im not talking about the side skirts :)
although i do have them, ill probably have to order the sticky tabs?
so let me get this right (i have 02-03) i put the clip through and on the end it is sticky tape and itll stick to the undercarriage? lol im just trying to get my facts straight
no...the sticky clips are just flat adhesive plates that you pull the protective plastic off and you stick the sideskirt onto the car, you buy the underbody clips to help support the bottom and you screw the front of the skirt on...
my ep is white...
- We can talk numbers all you want, but the bullshit stops when the flag drops...
ok so im gonna use the double sided tape and then drill the end into the end of the wheelwell
hey pal, part 31 is incorrect, the part number that you need to clip the rear lip to the rear bumper is 91503-523-003, i only ordered one ha ha because i wasnt sure and it was $5 :boom:... but anyways it clipped in and is hanging on perfectly, there was 4 little holes in the back middle part of the bumper that i used #31 for, which is in chevel's diagram as letter E clip 11 i think
bumping this good thread to help answer questions until i have time to put together a sticky worthy thread like we used to have that outlines the process
my ep is white...
- We can talk numbers all you want, but the bullshit stops when the flag drops...
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
Bookmarks