problem with suspension

[ep3drc]

hey i just got my ground control coilover sleeves installed and it is squeaking a bit in the back i dont kno if it will go away when i allign the suspension also having trouble getting all 4 sides to be the same height :( any thoughts?

[ClouD]

I've seen people slide a couple pieces of tubing and slips it on the coils to prevent it from squeaking. Double check to make sure all your bolts are tighten and torqued to specification. If you want all four to be the same height, I suggest you use a measuring tape and measure each sleeve to make sure they are the same height. Just get a common measuring point. For example, measure from the locking collar to the a line on the strut assembly.

[ep3drc]

also when i set it to a height i think it goes down a bit cause my rear fender is almost touching the tire