how to replace rotors

**davec** · 05-19-2008, 04:42 PM

i am replacing my rotors and the bolt won't come out any suggestions. the bolts are rusted in and i have tried PB Blaster but still no luck.

**oogy-boogy** · 05-19-2008, 04:46 PM

What bolts? Caliper?

If you're talking about the 2 phillips screws you need an impact screwdriver (cheap at harbor freight).

**wil524** · 05-19-2008, 05:04 PM

Originally Posted by oogy-boogy

What bolts? Caliper?

If you're talking about the 2 phillips screws you need an impact screwdriver (cheap at harbor freight).

Yeah, be careful you don't strip the head on the screws trying without the impact screwdriver.

**lil_Eggy** · 05-19-2008, 06:51 PM

Originally Posted by wil524

Yeah, be careful you don't strip the head on the screws trying without the impact screwdriver.

i stripped one of them when i was doing my brakes....had to use a dremel to cut a new slot and used a flat head finally get the thing off

**RHCP0801** · 05-19-2008, 07:10 PM

they sell a craftsman impact screwdriver at sears too, the bits are kinda cheap but lifetime warranty

Thread: how to replace rotors