Close

Page 11 of 43 FirstFirst ... 91011121321 ... LastLast
Results 151 to 165 of 633
  1. #151
    Site Sponsor charles's Avatar
    Join Date
    Apr 2008
    Location
    Nor*cal.....sj
    Posts
    982
    Quote Originally Posted by ep3jd View Post
    damn you guys all seem to love the ride on these.. i think mine sucks haha. i feel EVERYBUMP and hitting slight bumps fulls like going 80 into a curb.. been like that since day one. i dont understand.. maybe thesres something wrong lol
    you just described riding in a lowered vehicle.
    charles charles charles charles charles charles charles charles charles charles charles charles


    Hey j000000stin!!! Suck it, i know how to change my sig. muhahahaha

  2. #152
    College Budget.
    Join Date
    Apr 2008
    Location
    Union City/Riverside, California
    Posts
    289
    Quote Originally Posted by charles View Post
    you just described riding in a lowered vehicle.
    Haha! I find these actually softer than my H&R and Im lowered all the way on my Racelands

  3. #153
    Registered User FromTheInside's Avatar
    Join Date
    Apr 2008
    Location
    OK
    Posts
    295


    I know the stock top-hats are needed but can anyone confirm if any of the other components are needed?

  4. #154
    Orange County x 714 trippy's Avatar
    Join Date
    Apr 2008
    Location
    ima try 2 take over the world !
    Posts
    385
    Quote Originally Posted by LvisDin View Post
    Haha! I find these actually softer than my H&R and Im lowered all the way on my Racelands
    picturessssssssssssss !! =) i wanna lower it more 2 but i need more camber =) picture pleaseee

  5. #155
    Registered User matt062286's Avatar
    Join Date
    Apr 2008
    Location
    Columbia, MD
    Posts
    10
    Quote Originally Posted by FromTheInside View Post


    I know the stock top-hats are needed but can anyone confirm if any of the other components are needed?
    When I installed my suspension, I bought new top hat bearings, and new bolts (#9 and #13 in the pic, respectively), but ended up not needing them. I also bought the bolts for the rear shock and did end up using them. The ones I pulled out were rusted and the threads were rough. I would also recommend tie rod ends, or at least the rubber boots for them (neither are shown in this illustration); I completely destroyed the boot on one of them and the bearing inside was shot as well.

  6. #156
    Registered User FromTheInside's Avatar
    Join Date
    Apr 2008
    Location
    OK
    Posts
    295
    Quote Originally Posted by matt062286 View Post
    When I installed my suspension, I bought new top hat bearings, and new bolts (#9 and #13 in the pic, respectively), but ended up not needing them. I also bought the bolts for the rear shock and did end up using them. The ones I pulled out were rusted and the threads were rough. I would also recommend tie rod ends, or at least the rubber boots for them (neither are shown in this illustration); I completely destroyed the boot on one of them and the bearing inside was shot as well.
    So for the top hat bearings, when you say you didn't need them, do you mean the Racelands don't utilize them, or the ones you already had on the car were fine?

  7. #157
    Registered User matt062286's Avatar
    Join Date
    Apr 2008
    Location
    Columbia, MD
    Posts
    10
    The ones I had were in tip top shape still so I reused them.

  8. #158
    Registered User FromTheInside's Avatar
    Join Date
    Apr 2008
    Location
    OK
    Posts
    295
    Quote Originally Posted by matt062286 View Post
    The ones I had were in tip top shape still so I reused them.
    Thanks for your help and clearing things up for me

  9. #159
    Sucess comes in cans Yo_KyleEP3's Avatar
    Join Date
    Apr 2008
    Location
    MICHIGAN
    Posts
    473
    2nd batch comming sooooon please! lol

  10. #160
    k20a3 on tap tindrumstoo's Avatar
    Join Date
    Apr 2009
    Location
    wichita falls
    Posts
    120
    i asked raceland cs to do a ephatch group buy but they declined saying their prices were already super cheap and i guess i cant argue with that, too bad though... looking forward to the 2nd batch and hope the prices stay low!

  11. #161
    ephatch member kevinlopezzz's Avatar
    Join Date
    Jul 2008
    Location
    Socal
    Posts
    280
    glad i got mine right before they sold out!

  12. #162
    Registered User godzilapimpinn's Avatar
    Join Date
    Jun 2008
    Location
    miami
    Posts
    37
    i put mine on today.. but now i get these clunking sounds? any ideas?

  13. #163
    ephatch member Alex857's Avatar
    Join Date
    Jul 2008
    Location
    Pennsylvania
    Posts
    505
    ive had mine on for about a month or so already, i love them. I would not reccomend autoxing on them. mine were quiet as a mouse untill i did. i blew my front 2 struts lol im only lowered 1.5 from .75 in the back because of big wheels. other than the day to day noise after autox, i love them, feel very very close to stock

  14. #164
    Registered User moi-ep3's Avatar
    Join Date
    May 2009
    Location
    Texas
    Posts
    7
    i just bought some eibach sportlines but after reading this thread im gonna sell them and get me this coilovers it looks like they are really worth it!! is there a specific date on when they will go back on sale??

  15. #165
    Sucess comes in cans Yo_KyleEP3's Avatar
    Join Date
    Apr 2008
    Location
    MICHIGAN
    Posts
    473
    suppose to be end of june.

Page 11 of 43 FirstFirst ... 91011121321 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •