Question about Type-S axles. Will the ep3 intermediate shaft work with Type-S axles (02-04)? or do i need a type-s intermediate shaft?
cooool. thanks!
I know title says 02/03 ep with 02/03 DC5 Type S Parts
But to confirm you can also use a swap from a 04 model right 02/04 RSX-S?
Also I found a RSX-S 5lug setup with out calipers can I reuse the EP3 calipers with the 5lug conversion or will I need the RSX calipers?
Last edited by dreman; 03-24-2013 at 08:33 PM.
All 02-04 RSX-S are the same and yes you will need the RSX-S calipers. The rotors are bigger so the EP3 calipers will not fit plus reusing your EP3 calipers kind of defeats the whole purpose of doing the conversion.
Thanks guys.
Yup anytime, Let us know if you need any help at all. You can pm me or email,
SkareKrowZ@gmail.com
Sent from my SPH-L710 using Tapatalk 2
Last edited by bunk; 04-28-2009 at 06:17 AM.
Very help guys and thanks.
SkareKrow good looking out I just pulled a full setup off a 04 TYPE-S just now boy I'm tired and hurting. I'll do the swap in a few weeks I'm impressed with this site you've all been so helpful.
Last edited by dreman; 03-27-2013 at 05:35 AM.
I have 1 more question I noticed the rear ABS senors are no good so I need to get these asap.
After looking at honda/acura part numbers it looks like the 02-03 EP3 shares the same rear ABS sensors as 02-04 RSX Type-S
So just to confirm I can reuse the EP3 rear sensors on the RSX knuckles which will avoid lights on the dash for abs and work out?
Thanks in advance.
I don't see why not. The rears are identical aside from the extra lug
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks