My last thread got lost in the crash of the site so here it is:
Tools needed:
10mm socket (3/8th drive)
t30 torque socket
19mm socket w/ extention. (I used 1/2in drive)
Phillips head screwdriver
Flat head screwdriver
First Make sure your front tires are centered and disconnet your car's battery (no pics needed lol) using the 10mm. I forget what the actually "technical" time you should wait but I gave it about 10min before I started the steering wheel removal. The air bad computer takes some time to loose its charge basiclly. Dont need a face full of air bag!
Remove the cruise control button mounting screws:
remove the access panel:
Remove this air bag mounting bolt
On the other side of the steering wheel youll see this panel, remove it
Now the air bag (center of the steering wheel) will pull straight out. Becarefull of the harness connector.
Behind the bag youll see this:
Now pull the steering wheel off the column. I didnt need a steering wheel puller.
Flip it over:
install the two backets you just took off your OEM wheel.
Now put everything back together and your ready to rock.
Bookmarks