Replace front turn signals

[Otakuguy77]

Has anyone figured out an easier way to replace the front turn signals on the 02 EP3? Pulling out the fender liners seems like a lot of work to replace a bulb.

[thehulme]

as far as i know its the only way unless you have small and magical hands/arms. you dont have to fully remove the fender liner, just remove the clips on the front half of the liner with a flathead screwdriver, pull it back and grab the bulb. might be easier to have a friend hold the liner back while you replace the bulb.

[Otakuguy77]

I have the antithesis to small and magical hands. Ok, well that gives me something to look forward to. Thanks

[Passenger]

take the front bumper off

[nolaEp3]

i used some 10" needle nose pliers

[mondos]

+ did the the same (10" needle nose pliers )

[RoyVegasPinoy]

Has anyone figured out an easier way to replace the front turn signals on the 02 EP3? Pulling out the fender liners seems like a lot of work to replace a bulb.

So that's how you replace the turn signals? I've always taken out the headlight first haha.

[Ultra Pete]

can anybody tell me guys, which clips need to be removed in order to reach front parking light ? as i know myself - i would rip apart a half of a car...

pics are more than appreciated

thx
pete

[tatsu666]

and it's a 7443 amber bulb right??

[jed_averill]

Tell someone to do it for you. One with small hands

[WigginsSiR]

here's a pic on the fenders...
http://www.hondaautomotiveparts.com/...=FRONT+FENDERS
this is a pic of the front lamps....
http://www.hondaautomotiveparts.com/...T+%28+02-03%29

hope that helps

[ep_curious]

i got to it though the wheel well...just take the screw out and take the clip that holds the weather guard out. push the weather guard aside and slip your hand in there...you can get a good grip and good leverage...

i know its probably too late but i guess it will help in the future =)

[ImportCustomx]

moved to exterior..this is not a how to! becuase your asking how to do something doesnt mean it goes in the how to!