You might be referring to THIS ad on ClubEP3..
It doesn't have the Si listed..
You might be referring to THIS ad on ClubEP3..
It doesn't have the Si listed..
WTS: 17" beater wheels 4 lug, Dell Studio 1555 Laptop, Volvo Lip, Nikon mount lenses, BuddyClub wing, and more. PM me.
http://www.ephatch.com/forum/showthr...110#post935110
i am wondering is 02-03 oem mudguards will fit in my 04 ?
Modify them. Slice the flat side that goes towards the back that the side skirts are resting on. Then that one slice drop/fold it towards the front becomes part of the flap. Use some E-6000 Glue the folded part onto the front and thats about it. Then buy some type of hard plastic and cut it out and usen that E-6000 to glue it onto it. B-).
Sent from my HTC Evo 4G using TapaTalk Version 1.11.9a!
Where could i order the half nose bra with the fender sides cut off?
Hey everybody,
I have an 02 SI with an a2 swap and I am having a bit of a problem. The throttle is extremely touchy at anything under 3k rpm...it seems like the engine rocks pretty hard although the engine mounts (with esmm) seem to be in good shape. After 3k I get get on/off throttle quickly and everything seems smooth. I do have an unsprung clutch but don't know if that would cause the problem only at low rpm. I also have K-Pro although I have no idea how to use it (came with the car when I bought it).
Thanks for any input
Is there any 'right' way to take the center console paneling off? I'm gonna wrap it or paint it.
take your shift knob off first, then just be CAREFUL and use a small smooth screw driver, take the bottom one off first, then unplug your hazard button, then do the top one and take everything off of it for paint. just make sure to remember to plug your hazard switch back in or your turn signals won't work next time you go to drive haha. it's really just about patience and taking it slow
You're not joking, are you?
Yeah..
I'm not 100% sure because H-A doesn't use flat-rate shipping, but I think Majestic Honda's a bit cheaper, at $61.19.
If you just go at it, you'll see that it's easy...
There are currently 2 users browsing this thread. (0 members and 2 guests)
Bookmarks