Close

Results 1 to 9 of 9

Thread: six speed k24

  1. #1
    Registered User
    Join Date
    Jan 2011
    Location
    New Jersey
    Posts
    16

    six speed k24

    ok so i have a k24a2 swapped ep3 nd i wanna now buy a six speed. my question is i have my origional ecu from my ep3 kpro'd can i add a six speed using this ecu or do i need the dam rsx type s ecu kpro'd? i rly need clarity on this issue so plz lemme know for sure one way or the other. thanks

  2. #2
    Registered User mitchlikesbikes's Avatar
    Join Date
    May 2010
    Location
    Salt Lake City, Utah, United States
    Posts
    1,233
    i'm pretty sure you can use the ep3 one, but you won't have reverse lock out which i've heard isn't a huge deal. and you also might have to notch your shift mech or get a BCSS. some one else can probably chime in on this though

  3. #3
    Registered User
    Join Date
    Jan 2011
    Location
    New Jersey
    Posts
    16
    what is reverse lockout? and BCSS?

  4. #4
    Ephatch Sponsor nmysiismyn's Avatar
    Join Date
    Jun 2004
    Location
    Riverside, SoCal
    Posts
    1,234
    -What keeps you from going I'm reverse on accident
    -Buddy Club Short Shifter
    ___________________________________________
    Sent from my HTC EVO 4G via Tapatalk Pro

  5. #5
    Registered User
    Join Date
    Jan 2011
    Location
    New Jersey
    Posts
    16
    ok well reverse lockout is not a concern ive seen the 6 speed pattern in the ep3 before nd im not overly concerned with shifting from 5th to reverse. even without reverse lockout it will be hard to mess that up. also buddy club short shifter is no longer made for ep3. can one be used from an rsx or no?

  6. #6
    Registered User
    Join Date
    Jan 2011
    Location
    New Jersey
    Posts
    16
    also im not sure if anyone has done this but if you search ebay.uk you can finder six speed shifter boxs from the ep3. will these work? i know their cars are rhd but the shift pattern is still the same our 1st nd their first r on the same side so id think it would work what do you think? theyre prtty cheap too so if this will work i will buy one

  7. #7
    ephatch member cloumep3's Avatar
    Join Date
    Mar 2010
    Location
    Chicago
    Posts
    103
    Quote Originally Posted by civicsiep3 View Post
    also im not sure if anyone has done this but if you search ebay.uk you can finder six speed shifter boxs from the ep3. will these work? i know their cars are rhd but the shift pattern is still the same our 1st nd their first r on the same side so id think it would work what do you think? theyre prtty cheap too so if this will work i will buy one
    What year is your EP? Some of the older models and their shifter already has the extra slot precut for 6th gear. Now, you'd have to open it up to see if you have one or not. Also, I'm not sure which particular year or productions have these, but I've seen one in 02 ep3. Another thing you may consider is to look for inexpensive used dc5 6 speed shifter box.

    Oh, going into reverse from 5th is not as difficult as some say. The slot for reverse is cut in an angle, which makes it more prone to accidental slip in.
    For the reverse lock out(RLO) you can install a switch which gets wired up to your tranny solenoid and there's a diagram that shows DIY somewhere on one of other forums; I used cheap toggle switch from RadioShack and installed it on left of my shifter (when ON, goes into reverse; when OFF, doesn't go into reverse). Also, I've heard there's a way to program this with your Kpro which will work as reverse lock out; past certain speed, you won't go into reverse. GL!!!

  8. #8
    Registered User
    Join Date
    Jan 2011
    Location
    New Jersey
    Posts
    16
    rly?? i rly like what you are saying so u have this switch? id like to know more about this and any info on it. also when you use a DC5 TYPE s shift box do u have to modify the actual shift arm since ours is bent on the ep3? p.s i have an 04 ep

  9. #9
    ephatch member cloumep3's Avatar
    Join Date
    Mar 2010
    Location
    Chicago
    Posts
    103
    Quote Originally Posted by civicsiep3 View Post
    rly?? i rly like what you are saying so u have this switch? id like to know more about this and any info on it. also when you use a DC5 TYPE s shift box do u have to modify the actual shift arm since ours is bent on the ep3? p.s i have an 04 ep
    Here's what mine looks like:
    RLOS_1..jpg
    RLOS_2..jpg

    It def. needs some getting used to, but it doesn't bother me at all.
    Could be an overkill, but I've seen an actually blown dc5-s blown tranny in ep3 and it wasn't pretty. Mine's wired up to the tranny solenoid and I believe the diagram for wiring is somewhere on k20a.org or HT forum..., I think it was a copy from the service manual that showed the detailed layout of the solenoid. Also, I've seen one wired up to the cruise control switch area using the foglight like switch as well.

    As for the shift arm; my tranny is z3 6sp and they are 180 degree reverse from those of ep3/dc5-r's, and it needed to be modified, but I'm not sure about dc5-r going into ep3... sorry bro.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •