Open hatch, remove two 1.5" round plastic bolt covers (about 4 inches towards the center of the bumper from the taillights). Remove bolts underneath. Remove two rearwards facing screws in both wheelwells. Remove 2 upward facing screws under the front part of the rear bumper in the wheel well (one per each well). Remove two plastic clippy things under the bottom center of bumper. Put some painters tape on the painted metal above the bumper between the taillight and wheelwell. Get a friend to hold up the bumper while you pull outward on each wheelwell part of the bumper under the taillights. Remove bumper.
Bookmarks