Close

Results 1 to 15 of 29

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Registered User Nickle n Dimin's Avatar
    Join Date
    Jun 2008
    Location
    jersey
    Posts
    224

    Exclamation OBDII: Unsuported Readiness Help

    this is what my read out states


    Misfire: Unsupported
    Fuel Control: Unsupported
    Comprehensive Components: Ready
    Catalyst: Ready
    Heated Catalyst: Unsupported
    EVAP: Ready
    Secondary Air Injection: Unsupported
    AC: Unsupported
    02 Sensor: Ready
    02 Sensor Heater: Ready
    EGR: Unsupported


    my cat is off and am running an older version of kpro and have greddy turbo kit
    so my question, what needs to be READY ? would installing my cat back on fix this issue and get what needs to be ready... READY. i did take it to the tuner to have him set readiness (i don't have laptop) drove to inspection and got the same readout as above + now a CEL just minutes after i get out of the inspection parking lot
    Last edited by Nickle n Dimin; 04-06-2012 at 05:15 PM.

  2. #2
    Registered User Nickle n Dimin's Avatar
    Join Date
    Jun 2008
    Location
    jersey
    Posts
    224
    anybody? I might just order the cat tomorrow and wanted to know how getting 1 would set the readiness, so i can take it back to inspection without failing again.
    Last edited by ghettotech; 03-30-2009 at 02:00 PM.

  3. #3
    big block turbo club superchargedk20's Avatar
    Join Date
    Apr 2008
    Location
    2 cars ahead of you
    Posts
    2,462
    It's supposed to be like that. Some things aren't supported hence why it says unsupported. if u have a cel u will fail emissions. Set readiness and check through an obII scanner. If it reads what ur first post says then ur good to go. U need to find out what ur CEL is first. I've never had an issue with emissions and I have a 3in exhaust no cat and a revhard turbo kit

  4. #4
    Registered User Nickle n Dimin's Avatar
    Join Date
    Jun 2008
    Location
    jersey
    Posts
    224
    i went in twice to inspect the car both with the same obd2 readings from above and i get failed the CEL didn't come on till i left this afternoon. i will scan for the CEL in the morning
    Last edited by Nickle n Dimin; 04-07-2012 at 12:30 AM.

  5. #5
    big block turbo club superchargedk20's Avatar
    Join Date
    Apr 2008
    Location
    2 cars ahead of you
    Posts
    2,462
    And whats the reason they told u your car failed?

  6. #6
    big block turbo club superchargedk20's Avatar
    Join Date
    Apr 2008
    Location
    2 cars ahead of you
    Posts
    2,462
    There's a pic of my passed inspection. Same readiness monitors as you.


  7. #7
    Registered User Nickle n Dimin's Avatar
    Join Date
    Jun 2008
    Location
    jersey
    Posts
    224
    Quote Originally Posted by superchargedk20 View Post
    And whats the reason they told u your car failed?
    Quote Originally Posted by superchargedk20 View Post
    There's a pic of my passed inspection. Same readiness monitors as you.

    i failed for overall readiness it specifically says that and only that part of the test i failed i dont get how someone with the same ready would pass .. unless it has to do with the state? ..also checked CEL it was PO171 and was cleared

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •