I don't know of an EP3 that has done those tires - they are very narrow with about 23.5" diameter. They shouldn't be hard to fit. You sure you want to go with that size? That's a 7" tread on a 9" wheel. I'll keep my opinion to myself on this one.
Im really digging these wheels i found but they are wide so is it possible to run 17x9 +25 all around with a 205/40R17 lowered about 2 inchs on springs without doing alot of work ? What would i have to do specifically ? Roll front & rear or just rear ? And camber front and rear or just rear ? I don't mind stretch tires and rear camber so much. I just want to see how much work will i have to put in it to make it look good.
I don't know of an EP3 that has done those tires - they are very narrow with about 23.5" diameter. They shouldn't be hard to fit. You sure you want to go with that size? That's a 7" tread on a 9" wheel. I'll keep my opinion to myself on this one.
You can look through these threads;
http://www.ephatch.com/forum/showthr...re-Size-thread
http://www.ephatch.com/forum/showthr...ere-s-the-Beef
I seen it on other ep3 on the internet, i just want to know if i have to camber/roll fenders to fit them.
I also have the option on running 17x8 +30 on a 205/40R17 but if the 17x9 wont give me too much trouble i rather go with that
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks