That's clean man. What's next?
PS. What offset are those wheels?
Hey guys. I've been on this site for a long time, but just now getting back to visiting it more and posting, so I thought I'd make a members ride. I bought the car new in November 2004. The pictures below are kind of the progression over the years with the most recent ones first.
So, without further ado.
2005 Civic Si Ep3-
>>performance<<
-Cybernation Turbo Kit, with:
-Turbonetics 60-1 Turbo
-Turbonetics Wastegate
-TurboXS Blow Off Valve
-Agency Power Boost Controller
-RC Engineering 550cc Injectors
-3" Downpipe
-Skunk2 MegaPower 70mm Exhaust
-Spearco Intercooler with Custom Intercooler Piping Work
-Hondata KPro ECU Management
-Hondata Intake Manifold Gasket
-IGK Plugs
-Energy Suspension Motor Mount Inserts
>>suspension<<
-Tein Basic Coilovers
-Progress Rear Sway Tie Bar Combo
-Tanabe Front Strut Tower Bar
-J's Racing C-Pillar Bar
-SPC Camber kit front and rear
>>rolling stuff<<
-Rota Torque 17x7.5 in white
-Dunlop Direzza Z1 Star Spec 215/45/17
-Wilwood DynaPro Big Brake Kit - 6 piston calipers, 12.2" slotted rotors
-Wilwood Pads
-ATE Super Blue brake fluid
-Trust Titanium Gold Open-Ended Lugs
>>misc<<
-Sparco Sprint 5 Seats
-CorSport Boost Gauge
-Skunk2 10th Anniversary Shift Knob
-DC5 ITR Side Markers
-Aluminum Shifter Bushings via CorSport
-Neuspeed Short Shifter
-Seibon CF Mugen Replica Wing
-Mugen Rad Cap
-Mugen Reservoir Sleeve
-Alpha 8000K HID kit
-HKS Type-1 Turbo Timer
-Benen Polished Rear Tow Hook
-10% tint all around
-Gutted Rear
-Springfield Armory XD .45 ACP, 13 rounds full metal jacket
Last edited by gtolio; 08-11-2011 at 10:32 AM.
That's clean man. What's next?
PS. What offset are those wheels?
Thanks man. The torques that are on it now are stock offset, +45. I think the 215 tires make them look wider than they are. I'll probably run 5-10mm spacers at some point.
Next plans are a full cage with harnesses, an LSD and some other minor stuff, but it will probably be a while.
moved to first post
Last edited by gtolio; 08-11-2011 at 10:34 AM.
Can you take a few pics of the J's racing C pillar bar for me?
Here is one:
It's kind of hard to take pictures of at night. Excuse all the crap I need to sell in the back.
Maybe if you tell me what part of it you want to see exactly, I can take some better pictures tomorrow in the daylight.
Car looks great. I dont know how you deal with CO with the salt and snow in the winter man. I lived in Lakewood in the winter of 09 and it was too much for me to handle having to wash may car every day it was over 32 lol, but again the car is nice.
Thanks guys. Yeah, I don't drive it in the winter. I have 3 other cars.
The weather here is really up and down from day to day though. We might have 3 feet of snow one day and 60 degrees the next. The worst part is the gravel.
You had me till i saw "ROTA Torque"... J/K!!
USDM goodness man... i like it a lot! Have you had the Cybernation kit all this time? Curious if it has given you any issues over the years if so...
Nice ride, very clean!
Hahaha.... The car is the track whore, so wheels are a disposable item. I've tracked a couple sets of Rotas over the years and never had any issues with them, whatsoever. Honestly, the DC5 ITRs were a LOT heavier and the offset was a complete pain in the ass (+60 vs +45). I'm happy to have Rotas instead.
The kit has been on since 2008. I couldn't tell you how many miles I have done in that time, but I'm probably doing less than 12k a year. There's like 70k something on the car. The kit has been great up until recently. It has started smoking slightly under WOT and spewing a little bit of oil, so I think the seals are going on the turbo. I guess that's to be expected over time though.
I'd like to drop the turbo pretty soon and get it rebuilt, but we will see if I have the funds. I'll remove and install it myself, but I want someone qualified rebuilding it.
Clean sleeper. Hoe much you putting to the wheels wit that set up?
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks