***UPDATE***

Well I finally replaced the lower ball joint boots and got the fronts fully assembled. The toe is way off and I cant get in for an alignment till thursday, so I will take a few trips around the block and get it close enough to drive to the alignment shop safely. I didnt have my torch available to cut the rear MugenSS out, but I did change out all the corroded Hotchkiss endlinks for OEM ones. Notice the liberal use of anti-sieze during reassembly!!!



The front suspension is velvety smooth compared to the MugenSS! I only have driving around a little, the front coilovers are absolutely awesome.