Close

Results 1 to 12 of 12
  1. #1
    Registered User
    Join Date
    Sep 2011
    Location
    pennsylvania
    Posts
    2

    Ebay foglight install, fuse box!

    fuse.JPG

    So I've installed everything so far from the ebay foglight kit, but I am really confused with the connections to the fuse box. I have a 1-pin connector and a 4 pin connector. I know where the 1 pin connector goes but should the four pin connector go into the socket with 3 prongs? I'm really an amateur towards electrical work..

  2. #2
    Registered User HFPcivicSI's Avatar
    Join Date
    Oct 2011
    Location
    Pennsylvania
    Posts
    233
    Just to ask where in PA are you? Im in New Cumberland/HBG.

  3. #3
    Registered User
    Join Date
    Sep 2011
    Location
    pennsylvania
    Posts
    2
    I'm from Bucks County

  4. #4
    AKA Purple94coupe Euro-Yellow-Ep3's Avatar
    Join Date
    Nov 2010
    Location
    Newburgh, New York, United States
    Posts
    396
    dude i would suggest that u use a Oem switch and foglight harness. Ebay fogs are know to cause problems with the cluster. becarefull

  5. #5
    Registered User RYC_2NR's Avatar
    Join Date
    Jan 2009
    Location
    Portland, Or
    Posts
    14
    I have the Exact same issue with my fogs from MoonSi....
    I have a 1-pin connector and a 4-pin. I have no idea how to connect it. The 4-pin only have to wires in it. I'm assuming power and ground.

    Any thoughts guys??

    Thank you

  6. #6
    Registered User
    Join Date
    Dec 2010
    Location
    Texas
    Posts
    566
    I *think* HandA has a PDF for the install sheet on their site. Assuming thats the case your answer maybe will be there.

    Okay just checked and they are showing a seperate install guide between 02-03 and the 04-05 models. Maybe in the model change you may find an answer...
    Last edited by tinman5; 03-11-2013 at 07:16 PM.

  7. #7
    Registered User dble0's Avatar
    Join Date
    Sep 2009
    Location
    Georgia
    Posts
    244
    not to thread jack, but I was contemplating getting a set of moon's fogs. how would one go about hooking up his fogs to an oem harness switch? or could you use his harness and an OEM switch. I am actually a car electrician, and could probably figure it out once getting the parts, but I would rather know the answers before purchasing the parts. Minidan22 if you can give me a day or two I will look in my car and check the wiring diagrams for the car and see if I can get you an answer since I jacked your thread.

  8. #8
    Registered User RYC_2NR's Avatar
    Join Date
    Jan 2009
    Location
    Portland, Or
    Posts
    14
    Quote Originally Posted by tinman5 View Post
    I *think* HandA has a PDF for the install sheet on their site. Assuming thats the case your answer maybe will be there.

    Okay just checked and they are showing a seperate install guide between 02-03 and the 04-05 models. Maybe in the model change you may find an answer...
    Thanks, but this is the install sheets I'm using. Neither one show a 4-pin.
    Has anyone else had this issue?

    dble0, did you find a solution?

  9. #9
    MECP Installer Mighty_Mouse_Ep's Avatar
    Join Date
    Apr 2008
    Location
    Bay Area 510
    Posts
    728
    02 ep's dont have the pins on the fuse box. Thats why Honda fogs say 03-05 ep's
    Last edited by pinoy em2; 04-29-2009 at 01:49 AM.

  10. #10
    Registered User dble0's Avatar
    Join Date
    Sep 2009
    Location
    Georgia
    Posts
    244
    PM me your number

  11. #11
    Registered User jerrymouas's Avatar
    Join Date
    Mar 2009
    Location
    nc
    Posts
    45
    When I install my eBay fog a year ago, I use that diagram to hook my up and they work great. The small brown pin from the ebay harnest goes into, the 1 pin connector and the other pin that white with 1 red wire goes into the 6 pin connector spot. Pm me if you need pictures. Hope that help.
    By the way my car a 2002 not sure if there the same as 04-05?
    Last edited by jerrymouas; 04-10-2013 at 07:17 PM.

  12. #12
    Registered User
    Join Date
    Sep 2012
    Location
    Orlando
    Posts
    27
    Quote Originally Posted by Euro-Yellow-Ep3 View Post
    dude i would suggest that u use a Oem switch and foglight harness. Ebay fogs are know to cause problems with the cluster. becarefull
    Been there...... it suck monkey balls. I made a thread about how to fix the cluster. USE OEM SWITCH

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •