i would not recommend u to use the a3 mani, you can find the k24 mani pretty cheap on craigs or ebay or local junk yard. You will need a TB adapter from kraftswork
To use my manifold from my ep3 I have to tackle the coolant port issue on the head. I've heard you can tap it and reroute it back.
Can someone point me in the right direction to find out how to tackle the coolant port issue on the head?
I want to tap the head.
Thanks.
i would not recommend u to use the a3 mani, you can find the k24 mani pretty cheap on craigs or ebay or local junk yard. You will need a TB adapter from kraftswork
Geez, Eddie did you ask on enough threads and forums, lol.
I have a 70mm Skunk2 Pro Series IM & a 70mm Hybrid Racing TB and I want to be able to use both of them.
I need to know how to tap the head for the cooling port. Thanks.
TS/OP should be temp banned for spamming. I can understand the urgency of wanting an answer but there's no need to post the same thing over and over in different threads. You make it harder for the next person to find the answer. Also, if you had just one thread you would've seen someone already replied with an answer..
/rant
Green Crew #7
Please donate and support EPHatch.com: Greenie Status, License Plate Frames, Banner & Small 'ephatch.com' Decals
Was your WTS/WTT/WTB closed? Please read the following: link 1 & link 2
here's the post you missed:
http://www.ephatch.com/forum/showthr...=1#post1011681
Green Crew #7
Please donate and support EPHatch.com: Greenie Status, License Plate Frames, Banner & Small 'ephatch.com' Decals
Was your WTS/WTT/WTB closed? Please read the following: link 1 & link 2
google is new so ill cut him some slack....
1st off... You are 100% right to say that. I definitely jumped the gun and got carried away.
2nd ... SORRY... I will properly use this forum in the future.
3rd and lastly ... I am so pleaded with all the good info I have gotten from this forum and am very happy to be a part of it. I will be a productive member and use this forum more responsibly.
And thanks so much for sending me in the right direction with the diy post for tap the head.
Last edited by Eddie Murphy; 07-17-2013 at 09:11 PM.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks