Ummm. Nice and meaty.
Almost makes me crave a steak...
Sent from my SPH-L900 using Tapatalk
Haha yeah, saw that at the CRSX meet.
HRRNNNT!
Haha, so very nice man! :drool:
Ummm. Nice and meaty.
Almost makes me crave a steak...
Sent from my SPH-L900 using Tapatalk
My current semi-ridiculous setup (probably only silly because I don't stance; fully functional "spirited driving" alignment on her )
XXR 513s 15x7 +15 in 205/55/25 Kumho Ecsta 4X tires.
As you can see, a bit pokey.
Got tired of that, so switching to Rota RBs (basically the same exact wheel haha)
in 16x7 +40 with Michelin Pilot Sport A/S 3s in 225/50/16.
I'm hoping to lose the poke but still fill the fenders out pretty well, we'll see! :D
That's a functional rock climber ep3
OK.
Fail.
Rotas showed up and won't clear the Wilwood calipers (DPHA not a BBK) up front.
So, I'm going to have to run some spacers.
Anyone got recommendations on a brand?
I've never even looked into spacers before.
Question : im planning to get wheel 17x8 5x114.3 45offset
Tire 225x8 45offset
Low on tein spring
Fender rolled.
Will this set rubbing ?
Sent from my iPhone using Tapatalk
Last edited by Key Tho; 06-06-2014 at 09:35 AM. Reason: infor
You should be good. But if you want them to look nice and sit flush you could always get a 5mm up front and rear. Any bigger would need extended wheel studs. But 10mm spacers would make them look perfect
@Ubeyo thanks if u use extended wheel studs i think it will rub the fender
Sent from my iPhone using Tapatalk
Sup guys, just adding to the noise...
Just picked up some 17x7.5 +45 Sparco Assettas & 215/45/17 G force comp 2s for the summer.
Should be even better by next week with the new Aspec suspension in.
/Giddy
Current set up:
Wheel size: 17x8 +35 offset (CCW)
Tire size: 225/45/17 (Kuhmo Ecsta 4X)
Drop: 1" front 1" rear (Fortune Auto Coilovers)
Fenders rolled: No
Rubbing: Yes rubs in rear
how are those G-force comp-2 performing on the ep ? i'm planning on getting 4 of them installed this week ; also have a 215-45-R17 with stock suspension setup
Heys guys Im hoping maybe someone can help me out... been searching through clubep3 and ephatch but I still feel like a lost pup... lol
I have an nhbp 02 ep3 on the RSX Type S A-spec Suspension...
Okay so my question.... will any of these 3 rim specs possibly fit without issue since I'm not sitting so low with the A-Spec?
17x9in with +20 offset
17x8.25 with +22mm offset
17x8 with +20
I saw other posts asking about 17x9 fitment... but i didn't come across anything about 17x9 +20 offset, and I don"t really understand offset...
I tried using the link previously posted but still unsure...
http://www.1010tires.com/Tools/Wheel-Offset-Calculator#
Help me get out of my winter stockies and into new rims lol
There are currently 5 users browsing this thread. (0 members and 5 guests)
Bookmarks