Just to update, the motor connectors are the same as the TPS sensors connector. Here is link.
http://www.ebay.com/itm/141294112992
The guy sucks, he just wants you to send him money and he could care less if you get a quality part or even a part at all within a decent time frame.
Just to update, the motor connectors are the same as the TPS sensors connector. Here is link.
http://www.ebay.com/itm/141294112992
Last edited by 2004ep3hatch; 06-27-2014 at 08:20 PM.
Supercharged K24 Frank powered
PM a Moderator for assistance anytime
Someone jacked my head unit and ripped out a couple connections to my leveling motors in the process. I believe the wires that got disconnected were for pins 1 and 2, the dimmable light in the switch. Now that I only have the stock radio, where can I source these dimmable power and grounds? I would prefer to use a fuse tap so I don't need to damage the stock wiring.
Is pin 1 red and pin 2 red/black or the other way around? Talon has it one way and ragebomb has it the opposite way. I also think these are both positive + circuits yet both diagrams label them as negative -...
There are currently 2 users browsing this thread. (0 members and 2 guests)
Bookmarks