Pull cluster out, remove bulbs, reinstall cluster. Pass safety.
Only a suggestion as you clearly have no issues driving without an air bag or abs.
Cheers
Any FIX!! Mugen Steering Wheel = SRS Light ON, Brembo Brakes w/o ABS = ABS Lights ON in the CLUSTER.
I purchased a track car and now I need these light off to get it safety certified in my jurisdiction.
Car was purchased with the following changes:
1. changed the steering wheel on my ep3 to an aftermarket steering wheel without airbags, now the SRS Light is ON in the cluster.
2. changed the stock brakes to brembo brakes w/o the abs sensor, no the ABS Light is ON in the cluster.
The car was previously only used for the track, but now I want to use it on the road. It needs to pass safety on my local area and those two things could prove to be a problem.
Thanks for anyone who can add to this topic.
Note: I did a search, but didn't find anything too detailed. Just some pinout info that was vague. Hoping someone can give me some good advice or point me in the right direciton.
Pull cluster out, remove bulbs, reinstall cluster. Pass safety.
Only a suggestion as you clearly have no issues driving without an air bag or abs.
Cheers
Last edited by MugsyTheGr8; 05-24-2009 at 07:57 PM.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks