I got the emusa kit, replaced the wastegate with a turbonetics and the bov with a hks . I also have hondata solenoid4 port and 4 map sensor. My question is how to do the vacuum lines. I've found some info but not sure.. the hondata chart shows the boost source line coming from the turbo to the solenoid, but what about when using the emusa turbo which doesn't have the port for the line?? Should I tap into the piping right off the turbo for the source of boost (for the boost solenoid)?? and run the bov and boost gauge off the intake manifold on the pcv connection. Or..... run everything from a vacuum block connected to the manifold???
Bookmarks