post some pics!Originally posted by madbrain
I have used one Hot Shot CAI to make intakes for three cars. I bought the CAI for a Mazda Mx-6 but it did not fit an auto so I cut it and made a SRI. I used another bend of the tubing on my girls Civic Ex and I used the last piece of tubing on my EP. I was lucky because this last piece had the bracket on it. I bent the bracket to position the intake away from the engine and away from the tranny linkage. The tube bends down and the filter sits just above and to the left of the motor mount. I slipped the bracket over the post for the battery hold down and used one of the 10mm nuts from the stock air box to tighten it down. Easy, clean, and believe me this thing does not move at all.
Ghetto, maybe but you would only know if I told you. BTW only temporary.
Bookmarks