It is 60mm(about 2.36in).
I knew it got pretty tight in the stock resonator but 1-3/8:, damn that's small.The stock midpipe is 1.75" and necks down to 1-3/8" in the resonator
If it's a 2" mandrel bent with a straight through design, including the resonator, then you should be good to go. Pricey none the less, but the size is the only critical factor.Will have to wait and see what the numbers tell.
I paid $150 cdn for a 2.25" crush bent and tested it and a 2.5" crush on the dyno. No bling for me. You will loose bottom end tq if you go larger than 2.25" crush or 2" mandrel. The stock midpipe is 1.75" and necks down to 1-3/8" in the resonator. hth.;)
Midpipe
Last edited by myeverlovinsir; 12-25-2003 at 11:06 PM.
It is 60mm(about 2.36in).
I knew it got pretty tight in the stock resonator but 1-3/8:, damn that's small.The stock midpipe is 1.75" and necks down to 1-3/8" in the resonator
Any updates on where we can buy this thing?
No updates, A&J has been closed since the holidays, they reopen this monday.
You can buy it from A&J Racing
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks