Hondata announces the reflash for the Greddy turbo Civic Si

[ep_nezay]

Originally posted by sleepin02si
Does anyone have a dyno for the Greddy w/IC and Hondata Greddy Reflash?
Don't forget to tell us what psi you are boosting;)

Did you read the thread?

[sleepin02si]

Originally posted by ep_nezay
Did you read the thread?

Yeah, I did. Then I even read it again for good measure. Nowhere do I see a dyno for the Greddy with the Intercooler and Greddy Hondata Reflash . I only see a post stating:

Keep in mind guys/girls, that this was done with stock boost (6.5 psi) It made 260 @ 8psi

Later on, you said:

Yes, my car got dynoed with an IC

Was that at 6.5psi or 8psi? Did you have the Greddy reflash also? Can we just see the dyno like I had originally asked? If you really don't want to show us, that's cool. I was just asking.

[ep_nezay]

Originally posted by sleepin02si
[B]Yeah, I did. Then I even read it again for good measure. Nowhere do I see a dyno for the Greddy with the Intercooler and Greddy Hondata Reflash . I only see a post stating:

You know the dyno on the first page?

That was my car, the hondata unit was tested on my vehicle. Which it had an IC and was boosting 6.5psi, as I mentioned.

[bigjuice]

After doing some reading on hondata's site, I have a question. Hondata's turbo reflash is only if your happy with stock boost wich is around 6.5 psi. When installing the turbo kit + i/c, does the restrictor plate stay on to prevent from boosting high pressure?

[ep_nezay]

No, it is still removed.
Having a boost controller would help, keeping settings at their limit.

[plpong893]

ep_nezay you really need to go run ur car at the track...PLEASE do it for the fans lol

[ep_nezay]

Originally posted by plpong893
ep_nezay you really need to go run ur car at the track...PLEASE do it for the fans lol

I have already:)



Now, if you are talking about the strip, I did that too, I ran a 14.1 @100mph and a 2.4 60ft on street tires:confusem:
I should see high 13s on streets with a better 60ft.
But next time it will have slicks, like it WAS planned.
I should have a vid up next time I run it. It was a last min. event so I was not prepared.

[plpong893]

thanks for the info...... o i hate u bc u have work wheels.....where did u get them and how much....14.1 with all ur work including hondata?...ur car is sick

[trk]

Originally posted by ep_nezay
I have already:)



Now, if you are talking about the strip, I did that too, I ran a 14.1 @100mph and a 2.4 60ft on street tires:confusem:
I should see high 13s on streets with a better 60ft.
But next time it will have slicks, like it WAS planned.
I should have a vid up next time I run it. It was a last min. event so I was not prepared.

nicest car on ephatch, hands down...

[ep_nezay]

Originally posted by plpong893
1)where did u get them and how much....2)14.1 with all ur work including hondata?...3)ur car is sick

1)Got them at jhpusa.com
You can get them for $300 each.

2)Yea, remember, thats with a bad 60ft, if I get a 2.2 60ft, Im in the 13s with street tires. :)

3)Thanks.

[ep_nezay]

Originally posted by trk
nicest car on ephatch, hands down...

Thanks

[plpong893]

what kind of drop do u have and what siaze tires

[ep_nezay]

Its dropped on Tein type FLex with 225-45-17 Azenis.