Kevin Sampson
drivenstyle@hotmail.com
2nd and 3rd grinds
Calvin Quam
calvin02z24@yahoo.com
Kevin Sampson
drivenstyle@hotmail.com
2nd and 3rd grinds
Thomas Ricciardi
Tomr3988@aol.com
grind from 1st to 2nd
Hpowered1 [at]yahoo.com
Problems getting into 1st and shifting into 2nd. Other times it won't go into reverse.
1st to 2nd grinds. 3rd sticks and locks out.
Tyler Evans
wevans273[at]charter.net
Bryan Miller
Knivesdesu[at]aol.com
Frequent grinding when downshifting into first from a complete stop, frequent grinding when down and upshifting into second and third, occasional trouble shifting into reverse.
Kris Massey
nastymassey_bsp [at] yahoo.com
Grinding from 1st to 2nd. Sometimes reverse wont engage.
Darren Wagner
Betsymy1stluv@att.net
1st to 2ed is my problem but any gear it can happen too i heard its because the synchronizers are shit in the tranny, and because the tranny is a cord one instead of a rod.
Honda Please help
Last edited by thugfolife2; 05-02-2004 at 09:12 PM.
Art Viado
Art@aaimotorsports.com
1st to 2nd has a nasty grind.
rob votin
rvotin at ra.rockwell.com
2nd grinds a lot
shomeo1 [at] hotmail.com
I had this problem for about 9 months till I went to a new dealership and they found out it was the Master Cluch Cylinder. I only feel it in the cold now. I think I am going to get some new trans fluid and see if that helps with the last of it.
2nd to 3rd after 6000 rpm sucks really!!!!:'(
There are currently 4 users browsing this thread. (0 members and 4 guests)
Bookmarks