Update.
Drilled the hole through damn bolt.
Need to stop by hardware store tommrrow and buy tap and better bolts.
JIC bar for DC5.
End Plate
Didn't provide replacement bolts for the bar.
So I went out and bought new washers and bolts from local hardware Store.
Comparsion.
Test Fit.
During Installtion.
Freaking bolt snapped in half.
:yellm: :yellm: :yellm:
Bar is not installed because of that snapped bolt.
Thinking about just sell the bar and buy alex c pillar bar.
Possibly it was a message from god saying I shouldnt add unnecessary weight to my car.
:angel:
Last edited by Civicvtec1ps; 05-07-2004 at 03:25 PM.
Update.
Drilled the hole through damn bolt.
Need to stop by hardware store tommrrow and buy tap and better bolts.
Another Update.
Tried to fix with Drill Out tools.
Didn't work too well.
So I bought Self tapping screws and Worked great.
I will post new pictures later tonight.
Woah there Herc dont go breaking up all those bolts.hehe
Looks nice how much was it? I'm still interested in getting one of those Mr. Alex tower bars..
nice piece. where'd you get it and how much if you don't mind me asking?
How in hell did you get the bolt out? When I removed my Mugen Bar (sold to a RSX users) the bolt snapped on me too. :'( I didn't get around to remove it yet, so how'd you do it?
I bought used one off (Hondawerx).Originally posted by Tenacious G
nice piece. where'd you get it and how much if you don't mind me asking?
Ask him directly for price quote.
It was bitch to get it out really.Originally posted by raiyo
How in hell did you get the bolt out? When I removed my Mugen Bar (sold to a RSX users) the bolt snapped on me too. :'( I didn't get around to remove it yet, so how'd you do it?
Tried to use Drill Out tool ,Didn't work well at all.
So I bought Self Tapping Screws and Drilled right through with cordless drill.
It was pain in the ass to get it off.
Finally Pictures.
Self Tapping Screw.
End Plate
Both bars are diry as hell.
Just need to repolish them later when I have time.
Last edited by Civicvtec1ps; 05-08-2004 at 10:16 PM.
lol so u jus drilled through the broken bolt with a self tapping screw ?
Yup.Originally posted by Ep3 No.2
lol so u jus drilled through the broken bolt with a self tapping screw ?
nice. do u feel a great difference in your ride handling? and where did you get that cusco strut bar b/c i want one also. thanks
Cusco.Originally posted by mugen_ep3
nice. do u feel a great difference in your ride handling? and where did you get that cusco strut bar b/c i want one also. thanks
www.robearracing.com
JIC
www.Hondawerx.com
Another Update.
Found out that Rear Seat can not be used with JIC bar.
I may have to find the replacement.
Car is daily drive and I do use rear seat quite often.
Neuspeed rear bar works with rear seat, currently using it.
you REALLY sure the seats won't go back up? when I had my mugens on I thought the same. I just SLAMMED the seats and it locked in place. Give it a try. The bar looks as thick as the mugen.Originally posted by Civicvtec1ps
Cusco.
www.robearracing.com
JIC
www.Hondawerx.com
Another Update.
Found out that Rear Seat can not be used with JIC bar.
I may have to find the replacement.
Car is daily drive and I do use rear seat quite often.
There is no way i can put seats back in the place.Originally posted by raiyo
you REALLY sure the seats won't go back up? when I had my mugens on I thought the same. I just SLAMMED the seats and it locked in place. Give it a try. The bar looks as thick as the mugen.
Bar is freaking THICK.
Bar sticks out about an inch from the latch for rear seats.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks