god i wish i had pictures from my install...as for the CTR skirts, if you have an 04/05 you will be able to use the exact same clips, if you are getting the ctr skirts new then they will come with the clips, the only thing will be that you wont have the holes drilled on the quarter panel for the clips, so you can either drill holes yourself, OR honda sells sticky clips which slide into the slots for the clips on the sideskirts...and that little problem spot with no drill holes is only on the 3 or 4 clips on the "fin" of the skirt...
NOW, if you have the 02/03 ep, then you need to either drill for every clip, which i highly discourage because the chance you'll screw up is almost certain without a template...NOW the option for the 02/03 skirts is using the sticky clips i mentioned above, which are available from honda america...
i used sticky clips since i have an 02 and htey are HOLDING UP GREAT...
something else i suggest is using the underbody clips available from www.japanparts.com
there are 2 per side, they use 2 screws nad 1 snap in clip, they are some added support and safety to hold the skirt in place...there is a spot to drill on each skirt to add a 3rd underbody clip, i did this and i highly suggest it...
Bookmarks