Reply With QuoteThere is a small chance you will need to resurface it. Don't worry about it unless there are heat spots on it or it is really scratched.
I took off my tranny to check out the clutch and it looked like this:
So I figured I'd get a new disc. I found a disc (no pressure plate) with 12k miles on it. I'm doing the install this weekend and no place will be open to resurface the flywheel. I've heard of people scruffing the flywheel will 120 grit sand paper or emery cloth. What should I do?
I'm planning on buying a new clutch, pressure plate, flywheel, bearing in a month or two. I just need this to last in the meantime.
There is a small chance you will need to resurface it. Don't worry about it unless there are heat spots on it or it is really scratched.
Find a shop that can beadblast it, that is the next best thing to resurfacing. But I would suggest a resurface.
What clutch are you planning on?
ALL advice issued with this "Disclaimer"
Tim "the Toolman" Taylor is my HERO ! ! !
"Labor Unions are Domestic Terrorist orgainizations"
Just another OEM clutch for the time being (used but WAY meater than the above).
Around here, everything will be closed saturday. Is there another I can do myself?
Last edited by WhiteOnRice; 05-01-2008 at 03:55 PM.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Bookmarks