great!
great!
How much hp can you expect with a k24a1/k20a2 turbo on stock internals. Also how much hp can it take before it blows.
I added anohter question regarding higher revs.
Car started first try, thanks for all the great info and keeping things going during the server issues. Rbc fits with no hood mods had to bend the support a bit though. I would say watching the hood close reminds me of 25 clowns getting into a mini cooper.
I'm going to have to disagree with you a little bit here. This may be true for the K24A1/A4, but I had stock bottom end K24A2 with upgraded valvetrain. I was revving it to 8500 rpm and it held up just fine, and it did this for probably 20,000+ miles. The motor did end up having trouble totally unrelated to the rev limit, and the rods have been pulled and there is no sign of damage to the rods or the bearings or the pistons.
Yes true it is geared a bit more towards the a1,a3,a4 but even on the k24a2 I wouldn't consider the head as the limiting factor to revving higher IMO. I'm also sure you didn't rag the shit out of your baby and rev it to 8500 all day long either. I'll edited the post. However I wouldn't reccomend most people revving their k24a2's to 8500.
Last edited by davisj3537; 05-07-2008 at 07:03 AM.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks