Awesome, car started right up first try. Sounds good, I'll do some datalogs tomorrow and post them up. Hopefully someone here can let me know how it looks.
vids vids vids vids vids!!!!!! i wanna see this turbo setup in action!!!!
Ok guys I really need some help desperately. My car is not running very well and I'm so frustrated I just wana part it out and sell it OMG. It seems like it's ballz slow and even when I hear it boosting the car goes no where. I'm scared to drive it and I'm just so damn exhausted at this point. I spent 5 days non stop installing this engine and turbo kit with little to no sleep and nothing but saved ep hatch diy's luckly I had saved precrash. All the helpful tuning threads that used to be searchable are history. Now I've been babying it from one shop to the next but it still doesn't seem right. Sorry for the rant but I'm just exhausted and out of answers.
What exactly are you needing help with and what are your symptoms sir?
Well the car seems like it's not making any power. I can hear the turbo and see the boost climb. None of the couplers is blown off and it just feels weak. My a3 and greedy made more power. I had it on a dyno last night and it only made 220hp. I'm not really sure if anything I'm doing to kpro is helping.
here is what I'm working with.k24 tune addicts.kal
Well I noticed the tune had my vtec set to 4700,
got a question. did u reuse the bolts i had on the turbo/mani (the bolts that i use to connect the two?) i didnt have the right size bolt so i used nuts as like washers. i only used those to mock it up. maybe if u used the the same bolts/nuts the i had on there is causing an exhaust leak? but it also sounds like u need a good tune. a tune makes a HUGE! difference but i sure u kno that
I might have but I checked everything and everything seems to be tight.
Yeah I reused those bolts but it didn't seem like they were a problem. The engine exhaust gets really loud I thought it was the waste gate but maybe its a leak I just can't find it..... Yeah the tune tune tune... I already blew my tuning money and it didn't turn out so well. I'm gonna suck it up and try my hand at lambda overlay when it gets dry out. Also the enjo motor mounts I think are to agressive and I'll probably swap my stocks with inserts back.
Does anyone know where my turbo should be spooled up at?
greddy kit on a k24a1 right? should spool very fast, like 3500. did you use the k24a1 exhuast manifold gasket or the a3 one? you ned to run the k24 one to match the ports in the head since they are bigger than the ports in the a3 head.
the turbo is building bost but not making any power is a good sign of bad turbo or boost/vaccuum leaks.
There are currently 2 users browsing this thread. (0 members and 2 guests)
Bookmarks