Im not too sure what you are asking partially here, but yes I believe it was an H4 connector harness that I used [the female harness connector I posted in the pic]. you do not need a male socket 9006, the part number two is what the actual H1 bulb plugs into and then becomes the male portion of the 'plug-in-process'. then number 2 goes into the back of the projector and is held in place with this fucking wire [I hate it if you cant tell] that hooks into the top portion of the projector itself. you will see what Im talkin about when you get them, you have to completely remove the headlight when changing out a bulb...
Bookmarks