For those who have the Pioneer Avic-d3.

[o4ep3civ]

Ok I just installed a Aciv-d3 indash headunit. Now, Theres two wires I need help hooking up. Ones the speed sensor wire. I have no Idea where to hook this up to and I called Pioneer and they didn't know either. I also called Best Buy and they weren't aloud to tell me. I also need help the wire that attaches to reverse lights. I looked at the wires for it and there two wires for the light I'm guessing one's positive and the other is negative. Now which one do I connect it to the + or -? Witch wire is witch?

So I need help hooking up the speed sensor wire and the reverse wire.


Thanks.

[VegaS10]

For future reference: http://www.ephatch.com/forum/showthread.php?t=46319

The reverse wire is not used unless you have a rear view camera.

[o4ep3civ]

Is this the blue/white wire I need?

[IMG][/IMG]

[o4ep3civ]

Or would it be the black curse box wire? Theres no blue/white wire though. There is a Blue/silver.

The only blue/white wire I see is the one on the bottom of the picture.
[IMG][/IMG]

[o4ep3civ]

Anyone?

[thisisagame24]

i have the D2 and i dont have either of those wires hooked up from the headunit

[VegaS10]

The black box with "AO" on the label is for your cruise control.

Try using the blue/silver wire.

Keep in mind, I am in no way liable if you tear something up....

[cantonep3]

do you have any pictures of your install. I have just bought mine and now have no idea how to do the doubledin. Please take a pic or tell me what you did. Was it hard to do?