^^^^^ lol at this guy
**** this thread is like 4 years old*********
SpleensSi How u likin the kit...how difficult was the install? How much u runnin? Jus askin cuz i have a kit coming in the next couple days...and if u got any tips/suggestions i would greatly appreciate it! thanks
ya no problem bud. first off i love this kit i was going to sc but my funds ran short so i got nitrous instead and dont regret it at all. the install was pretty simple its just figureing out where to mount everything that takes a long time. im running a 65 shot and my last trip to the strip i ran a 14.81 which i know i can improve on compared to my stock 16.3 its a big improvement. some tips i have is you have to replace the fuel line that runs from the firewall to the rail cuz the stock one is lined with plastic and you wont be able to tap the line properly. and double clamp the new hose at each connection to be safe mine leaked a little at the fire wall until i double clamped it. make sure to get 1 step colder plugs. i have the NGK iridium. get the ones for a stock type s 2002-2003 these will be one step colder and also be gapped properly. o and when you run your nitrous line from the trunk to the engine bay just follow the fuel lines.
Thanks a lot for the help man...hopefully installing on saturday.
ya no problem bigred let me know how you like it after you get it all done.
no i didn't reuse the old fuel line for two reasons:
1. it was only a couple dollars to get a new full rubber hose and worm clamps and
2. if i ever want to go back to stock i have the fuel line siting around so i can throw it in quick.
the reason for getting a new hose from the fire wall to the fuel rail is because the hose is rubber on the outside and plastic in the inside. which means it makes it difficult to T the line to run the fuel feed line for the nitrous kit.
Nah i understand all that... if you READ my original post i asked if you reused the ENDS of the stock fuel line. I have all new rubber fuel line from the firewall to the fuel rail as well... but as i stated before... i reused the stock fuel line ENDS so i didnt have ANY leaks or the need for crazy clamps.
One more question spleensi...what is the diameter of the fuel line from the firewall? What diameter did u get?
what shot are you running?
im running a 65 shot. the best time i have got so far at the track this year is 14.6 which is quick enough for me until i do something crazy under the hood.
There are currently 2 users browsing this thread. (0 members and 2 guests)
Bookmarks