I found these... they seem like they would work for both cup holder and foo-lights (in multiples of course).
http://www.superbrightleds.com/specs/LBM-x2.htm
however i cant seem to find anywhere where they are selling them.
any one know a website?
No.
It cuts off just as smooth as the dome light.
I found these... they seem like they would work for both cup holder and foo-lights (in multiples of course).
http://www.superbrightleds.com/specs/LBM-x2.htm
however i cant seem to find anywhere where they are selling them.
any one know a website?
Have you called them with those part numbers?
nevermind, if you click "see prices" at top it goes to the right page. i went another way earlier and you had to scroll through all their products, and this was not included.
i also searched for that part number and no one else has anything....
do these look like they would work for these situations?
why are the green lights considered jdm?
Because they are in the CTR?
Awesome writeup. It definately beats those Autozone bulbs, lol. Good job.
so ive been checking ebay the last couple days and i havent found any of the wide 140 degree leds with decent light output. are there any other sites that carry them?
yea, ill probably wait and look around. i want that ambience light feel.
sorry to revisit, but how do the JDM lights connect to the Dome light ground without cutting wires?? Does anyone have the kit who'd be willing to share this info?
Im thinking that, like fog lights, there is already an empty plug specifically for this task, which would provide the 12v power and dome light linked ground.
My 12v single pin spade is already in use by my Ocelaris Fog harness. Any way one could splice off the dome power wire and use a chassis ground to the same effect? Does the system use a fading ground or a fading power side? I guess that would tell me exactly how to run this if I couldn't use that power source...
I don't get it. In my "REAL" JDM Footlight kit, there's two wires to be spliced, one that is green/red and one that is blue/white. It doesn't look like it's supposed to travel anywhere farther than the where the green/red ground wire harness under the driver side is located. So is there an blue/white wire to splice it to? I don't have my car atm so I cannot check.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks