48,280.32 km`s = 30,000miles
193,121.28 km`s = 120,000miles
48,280.32 km`s = 30,000miles
193,121.28 km`s = 120,000miles
Last edited by Chad; 07-07-2008 at 07:43 PM. Reason: Cleaned things up
Changed mine just this afternoon, and OMFG I couldn't believe how much smoother the car shifts! Used the Honda MTF, since the synchromesh seems to be out of stock everywhere in my area.
I only managed to get about 2 1/2 quarts in to the tranny, and the car was about as close to level as I could get it (did this at my folks place, and their driveway isn't exactly horizontal)
Only issue I came across was losing the drain bolt washer in to the goop, then I friggin forgot to fish it out...so no washer currently on my tranny drain plug! Think my car's gonna explode before my next change?
Also, even with the fancy tube/funnel, it's a PITA getting the fluid in to the car, and not all over everything else.
How often should we change our tranny oil?
great DIY i was wondering if the Kseries Trans were like the B and H! Now i can change mine with confidence LOL
Guys im not seeing pictures or anything showing how to change the transmission fluid....
it takes less than 2 quarts.. i have an aem v2 and went through my engine bay, seemed easier cause the funnel would just sit there by the intake
I just changed my trans fluid. Seriously easier than a regular oil change. (First time for me changing fluids on my EP3) It was a pain in the ass getting to the filter lol
Thanks for the DIY
Good info, I will need to do that when my 6speed goes in.
i thought the drain and fill were on the passenger side?? or am i on glue
i was thinkin of just puttin a jack under the front corner and taking off the wheel and when i take out the drain plug i would lower it down with the jack and see if i could get more out then leaving it level and when i filled the tranny i would jack it back does this sound like a good idea or not??
You're thinking B-Series. Transmission is on the driver's side on K-series
You can, but I really don't think you'll get like an extra quart out or anything. Surprisingly, when I filled mine back up, the overfill started to pour at 1.5qts just like my manual said.
There are currently 2 users browsing this thread. (0 members and 2 guests)
Bookmarks