is that a wheel offset of +38?
Looks like the old one is gone..
Dunlop Z1 - 235/40-17 - Wheel Offset 38 - Suspension HFP
Will they fit on the front?
is that a wheel offset of +38?
Before I start - thank god the hatch is back!!! But now I need help before I make an expensive mistake! I have stock 16" wheels on my '05 with a 1.3" drop. Can I fit 225 50 16's without rubbing?? I'm looking at Dunlop Star Specs or Kumho XS and maybe Falken 615's depending on availability and price. I'm also considering 215 45 16, but I want the widest possible tire for Autocrossing. Any help would be greatly appreciated!! Anyone?
I run 235/40/17 Toyo RA-1s on my car on Buddy Club RSDs not lowered excessively and they fit just fine in the front. Required rolling the fenders in the rear though.
Last edited by icarus.na; 09-15-2008 at 11:58 PM.
Wheel size: 17x7.5 +45
Tire size: 235/40/17 BFGoodrich G-force sport. Also had 215/45/17 BFG g-force sport
Drop: ~0.75" (HFP suspension)
Fenders rolled: No.
Rubbing: No
My lame ass contribution :D
Wheel size: 15x6.5 +45 Konig Reasons
Tire size: 205/55/15 Yokohama Avid V4s
Drop: ~0.75" (HFP suspension)
Fenders rolled: No.
Rubbing: No
So, now you guys know your tiny tires will fit!
Last edited by BeaterEP; 03-21-2010 at 11:58 AM.
I'm planning on ordering a set of Drag DR 31's in white, and would like to double check that they will fit with 0 issues.
Wheel size: 16x7
Tire size: 205/55/16
Drop: ~1" (Eibach Pro Kit springs)
Based on the math I should have 1mm less clearance on the inside and the outer edge will sit 11mm farther out that stock. I took some measurements and did research and I "think" they will fit. My only real concern is running a 205 width tire on a 7" wide wheel. I don't want it to look stretched at all, I'm running the 205's because its what I have at the moment. When they wear out I plan on upgrading to some wider tires. Like I said, I'm almost positive this will work no problem, but haven't been able to find anyone running this tire/wheel combination to confirm with. Any thoughts are greatly appreciated!
There are currently 7 users browsing this thread. (0 members and 7 guests)
Bookmarks