anybody?
where do you guys tap for the fuel line?
aftermarket fuel rail?
or just replace the plastic line from the fuel rail with a rubber one and put a "T" ?
does anybody have any pictures of this installation?
thanks in adavance guys.
When I had Nitrous on my car I had it done both ways, first with the fuel feed line replaced with rubber hose and then last year I had it tapped into an aftermarket fuel rail. Both ways work good, the fuel rail way is alot cleaner looking but replacing the fuel line with rubber hose is alot cheaper. Here are the instructions from NOS for installing a kit in an RSX, these are the instructions I used to install my kit they are very detailed and will give you a good idea of the parts you need to do a complete install. You will notice some differences like our fuel feed line with the quik connects is about twice as long as the rsx one. I used the stock quik connects to make the new fuel line, I just sliced the stock line on the side and they came right off. Sorry I don't have any pics of the actual connection on my car but the instructions are better than a few pics.
Link for Nitrous instalation from NOS for RSX
http://www.holley.com/data/Products/.../199R10362.pdf
Goodluck let us know how it goes!!!!!
thank you very much. ill post some pics to help some other ppl once im done with it.
This is kinda late but im a Nitrous OG I've had it in for 2 years now...
I ran a new Rubber Fuel line from the fire wall.. T'd off that...
Haven't really spray yet, everything is hooked up and bottle is full, im going to get tune this tuesday at 10am and after that the fun will begin. ill keep you guys post it.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks