nice write up! Now we can change it to red if we want lol
anyone have any pics of their dash mods?
On a related note, does anyone have the different color rear illumination DIY? The one to make the orange backlighting blue or whatever?
nice write up! Now we can change it to red if we want lol
anyone have any pics of their dash mods?
great thanks I am going to take mine out tommorow!
http://www.civicforums.com/forums/7-...auge-swap.html
pics are not working
http://forums.clubrsx.com/showthread.php?t=102079
http://www.k-series.com/tech_detail...._CON_LITE_SWAP
there it is, from the king of light
I did this last summer and ended up messing up my gas gauge so it doesnt move at all.. and my speedo is off by about 4 mph.. and my lights have hot spots. On the bright side my cel isnt lit up
If you plan on doing this, make sure you get lots of practice on soldering (if you're a noob) and an extra pair of hands always helps. Put everything back CAREFULLY!!
Luckily i have a ukdm cluster waiting to go in
I can't tell if you can get at anything other than the bulbs. My Odometer reset button doesn't work.
Does anyone know if I can get at the switch that the reset button pushes against? Or do I need to replace the cluster?
my ep came with a cheap ebay adjustable glow cluster and when i took it off i messed up my mph needle, now it doesnt even work, any way to fix this?
which bulbs are those for the backlight?
are they all t5 bulbs? can they be replaced with LED resistor wedge bulbs?
kp
thread bump. i also need to know the size of these bulbs because my fuel and temp lights on the instrument went out this morning. i searched forum and found this thread. thanks ephatch.commmmmm
just to let you guys know,
this thread is 2 years old.
you can get t5 twist lock leds on ebay for about 50cents each...
the panel itself has orange fil which makes it orange and nail polish remover takes it off quite easily..or a high grit sand paper..which ever you prefer..
needles come off but need some force as stated in some of the links above...
best solution would be to buy bulb replacements and use the oem holders for the bulbs...ie buy leds that fit into the holders off ebay..they're dirt cheap...
kp
Green Crew #7
Please donate and support EPHatch.com: Greenie Status, License Plate Frames, Banner & Small 'ephatch.com' Decals
Was your WTS/WTT/WTB closed? Please read the following: link 1 & link 2
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks